Nortel Networks 8005DC, 8003AC, 8004AC, 8004DC, 8005AC manual Managing cables 8010, 8006, 8003 chassis

Managing cables for the Ethernet Routing Switch 8000 Series chassis 95

Managing cables: 8010, 8006, 8003 chassis

3Route the cable to the termination panel, loosely fastening the cable with Velcro straps or sheet fiber along the path.

4Fasten the connector onto the termination panel end of the cable. Use the instructions supplied with the connector. If you are using cables manufactured by Nortel, the connectors are already fastened to predetermined lengths of cable.

5Label the unconnected end of the cable with the node identifier (from site records) and the shelf, cage, slot, and port number.

6When all the transmitting cables from the same module are connected to the termination panel, use Velcro straps or sheet fiber wrapped around the cables to manage them.

7Using scissors, cut a section of the sheet fiber that is wide enough to wrap around the cables.

8Using scissors, round the corners of the sheet fiber section.

9Loosely wrap the sheet fiber and secure it using lacing cord or tie wraps ("Wrapping cables with sheet fiber and securing with lacing cord" (page 96)).

Nortel Metro Ethernet Routing Switch 8600

Installation — Modules

NN46220-306 02.02 Standard

4.27 July 2008

Copyright © 2005-2007, Nortel Networks