8681XLR module LEDs | Nortel Networks 8004DC, 8005DC, 8003AC, 8004AC

8681XLR module 53

8681XLR module LEDs

"8681XLR module LEDs" (page 53) describes the 8681XLR module LEDs.

8681XLR module LEDs

Type	Label	Color/State	Meaning

Port	TX	Green/Steady	The port is enabled but not
			transmitting data.

		Green/Blinking	The port is transmitting data.

		Off	The port transmit is disabled.

	RX	Green/Steady	The port has a link and is enabled.

		Green/Blinking	The port is receiving data.

		Amber/Steady	The cable is disconnected, the port
			is disabled, or the link is down.

Module	Online	Green/Steady	The module has completed its
			power-on self-test and software
			initialization and is operating
			normally.

		Amber/Steady	The module slot is disabled.

		Off	The switch power is off. If the
			switch power is on, the module
			is going through its power-on
			self-test and software initialization.
			A module in this state is not yet
			functional.

See Using Metro Ethernet Routing Switch 8600 10 Gigabit Ethernet Modules (315893-E) for a description of how to conﬁgure the 8681XLR module using the command line interface (CLI) or Device Manager.

Nortel Metro Ethernet Routing Switch 8600

Installation — Modules

NN46220-306 02.02 Standard

4.27 July 2008

Copyright © 2005-2007, Nortel Networks

Image 53

Nortel Networks 8004DC, 8005DC, 8003AC, 8004AC, 8005AC manual 8681XLR module LEDs Type Label Color/State Meaning

Contents

Installation Modules Ices statement Canada only Statement of conditionsInternational regulatory statements of conformity Vcci statement Japan/Nippon only CE marking statement Europe onlyEN 55 022 statements EN 55 024 statement EN 60 950 statement Bsmi statement for 8010, 8006 and 8003 chassis Taiwan onlyNOM statement 8010, 8006, and 8003 chassis Mexico only Información NOM unicamente para México Nortel Networks Inc. software license agreement General Page Contents Copyright 2005-2007, Nortel Networks Installing the jumper on an ESM 139 Contents Document changes FeaturesOther changes New in this release Navigation Prerequisites Introduction Metro Ethernet Routing Switch 8600 modules Metro Ethernet Routing Switch 8600 modules Copyright 2005-2007, Nortel Networks DS-3 MDA 8003 8006 8010 Module type Port type 8010co 8683POSM OC-3c MDA See Note OC-12c MDA Metro Ethernet Routing Switch 8600 R module feature set Metro Ethernet Routing Switch 8600 modules Mode conﬁguration requirements QoS and Trafﬁc Filters NN46220-508 8608GBE/8608GBM module ESM 8668 Metro Ethernet Services Module8608GBE and 8608GBM modules 8608GBE/8608GBM module LEDs Type Label Color/State Meaning Gbic order number Gbic type8608GBE/8608GBM module LEDs Type Label Color/State Meaning 8608GTE and 8608GTM modules 8608GTE/8608GTM module LEDs Type Label Color/State Meaning 8608GTE/8608GTM module8608GTE/8608GTM module LEDs Type Label Color/State Meaning 8608SXE module LEDs 8608SXE module8608SXE module 8608SXE module LEDs Type Label Color/State Meaning 8616GTE module 8616GTE module8616GTE module LEDs 8616GTE module LEDs Type Label Color/State Meaning 8616SXE module 8616SXE module LEDs Type Label Color/State Meaning 8616SXE module8616SXE module LEDs 8624FXE module 8624FXE module LEDs Type Label Color/State Meaning 8624FXE module8624FXE module LEDs 8630GBR module 8630GBR qualiﬁed SFP transceivers SFP order number SFP type 8630GBR module 8630GBR module LEDs Type Label Color/State Meaning 8630GBR module LEDs M mode conﬁguration requirements 8632TXE/8632TXM module 8632TXE and 8632TXM modules 8632TXE/8632TXM module LEDs Type Label Color/State Meaning 8632TXE/8632TXM module LEDs Gbic 8648GTR module LEDs 8648GTR module8648GTR module 8648GTR module LEDs Type Label Color/State Meaning 8648TXE/8648TXM module 8648TXE and 8648TXM modules 8648TXE/8648TXM module LEDs Type Label Color/State Meaning 8648TXE/8648TXM module LEDs Type Label Color/State Meaning Metro ESM 8668 LEDs Label Color/State Meaning Metro ESM 8672ATME/8672ATMM module with an OC-12c/STM-4 MDA 8672ATME and 8672ATMM modulesLabel Color/State Meaning 8672ATME/8672ATMM module LED Color/State Meaning 8681XLR module 8681XLR module 8681XLR module LEDs Type Label Color/State Meaning 8681XLR module LEDs 8681XLW module 8681XLW module 8681XLW module LEDs Type Label Color/State Meaning 8681XLW module LEDs 8683POSM module with an OC-12c/STM-4 MDA 8683POSM module 8683POSM module LED Color/State Meaning 8683XLR module 8683XLR module8683XLR qualiﬁed XFP transceivers XFP order number XFP type AA1403005 10GBaseSR AA1403001 10GBaseLR XFP order number XFP type Both Blinking Port is disabled GreenAA1403003 10GBaseER AA1403006 10GBaseZR 8683XLR module LEDs Type Label Color/State Meaning 8683XZR qualiﬁed XFPs XFP order number XFP type 8683XZR module8683XZR module 8683XZR Module LEDs Type Label Color/State Meaning 8683XZR Module LEDs 8691omSF module 8691omSF module Metro Ethernet Routing Switch 8600 modules 8691omSF module LEDs Label Color/State Meaning 8691omSF module LEDs CPU Ethernet management port Reset button DCE/DTE switch8692omSF module Serial ports 8692omSF module 8692omSF module LEDs LEDs 8692omSF module LEDs Label Color/State Meaning Ethernet management port Reset button Removing a ﬁller panel Step Action Procedure steps Prerequisites Installing a ﬁller panelInstalling and replacing a module Removing a module Navigation Conf slot slotnum state disable Loosening screws on the module 8003, 8006, and 8010 chassis Loosening screws on the module 8010co chassis Removing a module 8003, 8006, and 8010 chassis Ejecting the module from the chassis 8010co chassis Removing a module 8010co chassis Installing a module Electrostatic discharge can damage hardware Installing a module 8003, 8006, and 8010 chassis Installing a module 8010co chassis Seating the backplane connectors 8010co chassis Conf slot slotnum state enable Connecting a modem to the switch Connecting a PC or terminal to the switchProcedure job aid PC and terminal settings PC and terminal settings Parameter Value Modem settings Setting Value Procedure job aid Modem settingsData set ready DSR signal Ready to send RTS signal Ignored Disconnect Setting Value Connecting a network management station to the switch UTP/STP See Note None Ethernet ports 550 m @ Ohm coaxial None 450 ft DS-3 or Cable 137 m 125 µm None OC-3 or Single-mode 15 kmFiber-optic cable OC-3 125 µm None OC-3 Single-mode 15 km Fiber-optic cable 8683POSM OC-3 Procedure steps Managing cables 8010co chassis Managing cables 8010, 8006, 8003 chassis Image ﬁlenames for 8672ATME/8672ATMM/8683POSM Module Initializing the 8672ATME, 8672ATMM, and 8683POSM modules8672ATME 8672ATMM 8683POSM Image filename Initializing the 8672ATME and 8672ATMM modules ATM card in slot number is online Unsuccessful download screen output Initializing the 8683POSM module POS card in slot number is online 101 General speciﬁcations Environmental specificationsStandards supported Data rate and encoding Address database Performance specifications 64-byte packets Electromagnetic emissions Safety agency approvals Electrical specifications Physical specificationsConnector type GBICs See Note 1000BaseSX 62.5 200 850 1000BaseSX 62.5 160 850See Note 1000BaseSX 400 To-4 850 1000BaseSX 500 To-4 850 Height .8 cm Cable specifications1000BaseT Gbic Port connectors Bidirectional Data D + BIDD+ Connector Pin number SignalBidirectional Data D Bidd 197 887 hr Optical specifications 147 602 hr Height .8 cm Width 15.4 in .1 cm Depth 18.5 in .0 cm Weight 178 403 hr Input power Maximum Thermal rating 396 Btu/hr maximum Wavelength 1300 nm Optical budget Input power Maximum Thermal rating 193 Btu/hr maximum320 972 hr Gigabit Ethernet SFP transceivers Input power Maximum Thermal rating 614 Btu/hr maximum177 525 hr Height 13.4 mm Width Multimode fiber optic LC or MT-RJ Depth 22 in 54.4 mm Weight Varies with transceiver typeSingle-mode fiber optic LC 217 744 hr 1000BaseT transceiver Input powerType Category 5 copper unshielded twisted pair Maximum distance 328 ft 100m Height .8 cm Width Maximum Thermal rating 614 Btu/hr maximum190 803 hr Input power Maximum Thermal rating 261 Btu/hr maximum 15.4 in .1 cm Depth 18.5 in .0 cm Weight Lb 3.6 kg244 708 hr Input receive data + RX+ Connector types Input power 100 W Thermal rating 0 50 C162 000 hr Pluggable Small Form Factor Optics SFP modules OC-3c MDA MT-RJ OC-12c MDA Duplex SC 222 103 hr 8681XLR module Compatible with STM-64 Module Performance 64 byte packets Yes Compatible with STM-64 10GBaseLW 1310nm serial PMD 255 693 hr 10.3125 Gb/s with 64b/66b encoding 184 230 hr LC Duplex XFPs Dependent on GBIC, XFP, or SFP 10.3125 Gb/s LAN or 9.953 Gb/s WAN with 64b/66b encodingPort type 10GBaseR/W Management port Modem serial port Console serial portTXD Output RXD Input DSR Input DTR Output DTR Output DSR Input CTS Input RTS Output Input power Maximum Thermal rating 241 Btu/hr maximum Pin assignments DTE to DCE Switch Modem Signal Pin numberDCE DB-25 355 643 hr Pin assignments 8692omSF module Connector Pin number Signal Modem serial port Copyright 2005-2007, Nortel Networks 135 Procedure steps Aligning the CPU daughter card connectors CPU daughter card installation kit Copyright 2005-2007, Nortel Networks Securing the daughter card to the 8692 Series CPU Installing the jumper on an ESM ESM 8668, P1 connector header P1 connector header with jumper installed P1 connector header, pins 5 Conf slot slot-number state en Index Description 37, 37 Index Index Index Index Page Installation Modules