Nortel Networks 8004DC, 8005DC, 8003AC, 8004AC, 8005AC manual Navigation, Removing a filler panel

73

Installing Metro Ethernet Routing Switch 8600 modules and connecting equipment

This chapter provides instructions for installing and connecting Metro Ethernet Routing Switch 8600 modules in an Ethernet Routing Switch 8000 Series chassis to create a Metro Ethernet Routing Switch 8600.

Navigation

•"Removing a filler panel" (page 73)

•"Installing a filler panel" (page 75)

•"Installing and replacing a module" (page 75)

•"Connecting a PC or terminal to the switch" (page 86)

•"Connecting a modem to the switch" (page 86)

•"Connecting a network management station to the switch" (page 88)

•"Connecting communications cables to Metro Ethernet Routing Switch 8600 modules" (page 89)

•"Managing cables for the Ethernet Routing Switch 8000 Series chassis" (page 93)

•"Initializing the 8672ATME, 8672ATMM, and 8683POSM modules" (page 96)

Removing a filler panel

Remove a filler panel so that you can install a new module.

Nortel ships the 8000 Series chassis with a filler panel covering each empty module slot.

On a 8003, 8006, or 8010 chassis, the filler panel covers an empty module slot. On the 8010co chassis, the filler panel resembles a module and is installed in the empty module slot.

Nortel Metro Ethernet Routing Switch 8600

Installation — Modules

NN46220-306 02.02 Standard

4.27 July 2008

Copyright © 2005-2007, Nortel Networks