8648TXE and 8648TXM modules | Nortel Networks 8003AC, 8005DC, 8004AC

46Metro Ethernet Routing Switch 8600 modules

The Metro Ethernet Routing Switch 8600 system has three hardware operating modes:

•Default mode (32 000 table entries) supports up to 32 000 hardware records. This mode supports all modules.

•M mode (128 000 table entries) supports up to 128 000 hardware records. This mode supports M and R modules only.

•When used in the Enterprise mode of operation, R mode supports up to:

—256 000 IP routes

—64 000 MAC entries

—32 000 ARP entries

This mode supports R modules only.

For information about Ethernet VPN characteristics, see Engineering Guidelines for Metro Ethernet Routing Switch 8600 and Metro Ethernet Services Unit 1800/1850.

The 8648GTR module supports R and M mode. For speciﬁc R and M mode conﬁguration requirements, see "R mode conﬁguration requirements" (page

24)and "M mode conﬁguration requirements" (page 23).

8648TXE and 8648TXM modules

The 8648TXE and 8648TXM modules ("8648TXE/8648TXM module" (page 46)) provide 48 autonegotiating 10BaseT/100BaseTX ports using 8-pin modular (RJ-45) connectors. Ports operate either at 10 Mb/s or 100 Mb/s up to distances of 100 m with Category-3 or greater unshielded twisted pair (UTP) cable.

8648TXE/8648TXM module

Nortel Metro Ethernet Routing Switch 8600

Installation — Modules

NN46220-306 02.02 Standard

4.27 July 2008

Copyright © 2005-2007, Nortel Networks

Image 46

Nortel Networks 8003AC, 8005DC, 8004AC, 8004DC, 8005AC manual 8648TXE and 8648TXM modules, 8648TXE/8648TXM module

Contents

Installation Modules International regulatory statements of conformity Statement of conditionsIces statement Canada only EN 55 022 statements CE marking statement Europe onlyVcci statement Japan/Nippon only EN 55 024 statement NOM statement 8010, 8006, and 8003 chassis Mexico only Bsmi statement for 8010, 8006 and 8003 chassis Taiwan onlyEN 60 950 statement Información NOM unicamente para México Nortel Networks Inc. software license agreement General Page Contents Copyright 2005-2007, Nortel Networks Installing the jumper on an ESM 139 Contents Other changes FeaturesDocument changes New in this release Prerequisites Navigation Introduction Metro Ethernet Routing Switch 8600 modules Metro Ethernet Routing Switch 8600 modules Copyright 2005-2007, Nortel Networks 8003 8006 8010 Module type Port type 8010co DS-3 MDA Metro Ethernet Routing Switch 8600 R module feature set 8683POSM OC-3c MDA See Note OC-12c MDA Metro Ethernet Routing Switch 8600 modules Mode conﬁguration requirements QoS and Trafﬁc Filters NN46220-508 8608GBE and 8608GBM modules ESM 8668 Metro Ethernet Services Module8608GBE/8608GBM module 8608GBE/8608GBM module LEDs Gbic order number Gbic type8608GBE/8608GBM module LEDs Type Label Color/State Meaning 8608GTE and 8608GTM modules Type Label Color/State Meaning 8608GTE/8608GTM module LEDs 8608GTE/8608GTM module8608GTE/8608GTM module LEDs Type Label Color/State Meaning Type Label Color/State Meaning 8608SXE module 8608SXE module8608SXE module LEDs 8608SXE module LEDs Type Label Color/State Meaning 8616GTE module LEDs 8616GTE module8616GTE module 8616GTE module LEDs Type Label Color/State Meaning 8616SXE module 8616SXE module LEDs 8616SXE module8616SXE module LEDs Type Label Color/State Meaning 8624FXE module 8624FXE module LEDs 8624FXE module8624FXE module LEDs Type Label Color/State Meaning 8630GBR module 8630GBR module 8630GBR qualiﬁed SFP transceivers SFP order number SFP type 8630GBR module LEDs 8630GBR module LEDs Type Label Color/State Meaning M mode conﬁguration requirements 8632TXE and 8632TXM modules 8632TXE/8632TXM module 8632TXE/8632TXM module LEDs 8632TXE/8632TXM module LEDs Type Label Color/State Meaning Gbic 8648GTR module 8648GTR module8648GTR module LEDs 8648GTR module LEDs Type Label Color/State Meaning 8648TXE and 8648TXM modules 8648TXE/8648TXM module 8648TXE/8648TXM module LEDs 8648TXE/8648TXM module LEDs Type Label Color/State Meaning Type Label Color/State Meaning Metro ESM Metro ESM 8668 LEDs Label Color/State Meaning Label Color/State Meaning 8672ATME and 8672ATMM modules8672ATME/8672ATMM module with an OC-12c/STM-4 MDA 8672ATME/8672ATMM module LED Color/State Meaning 8681XLR module 8681XLR module 8681XLR module LEDs 8681XLR module LEDs Type Label Color/State Meaning 8681XLW module 8681XLW module 8681XLW module LEDs 8681XLW module LEDs Type Label Color/State Meaning 8683POSM module 8683POSM module with an OC-12c/STM-4 MDA 8683POSM module LED Color/State Meaning 8683XLR qualiﬁed XFP transceivers XFP order number XFP type 8683XLR module8683XLR module AA1403005 10GBaseSR AA1403001 10GBaseLR AA1403003 10GBaseER AA1403006 10GBaseZR Both Blinking Port is disabled GreenXFP order number XFP type 8683XLR module LEDs Type Label Color/State Meaning 8683XZR module 8683XZR module8683XZR qualiﬁed XFPs XFP order number XFP type 8683XZR Module LEDs 8683XZR Module LEDs Type Label Color/State Meaning 8691omSF module 8691omSF module Metro Ethernet Routing Switch 8600 modules 8691omSF module LEDs 8691omSF module LEDs Label Color/State Meaning Ethernet management port CPU 8692omSF module DCE/DTE switchReset button Serial ports 8692omSF module LEDs 8692omSF module LEDs 8692omSF module LEDs Label Color/State Meaning Ethernet management port Reset button Removing a ﬁller panel Procedure steps Step Action Installing and replacing a module Installing a ﬁller panelPrerequisites Navigation Removing a module Conf slot slotnum state disable Loosening screws on the module 8003, 8006, and 8010 chassis Loosening screws on the module 8010co chassis Ejecting the module from the chassis 8010co chassis Removing a module 8003, 8006, and 8010 chassis Installing a module Removing a module 8010co chassis Installing a module 8003, 8006, and 8010 chassis Electrostatic discharge can damage hardware Installing a module 8010co chassis Seating the backplane connectors 8010co chassis Conf slot slotnum state enable Procedure job aid PC and terminal settings Connecting a PC or terminal to the switchConnecting a modem to the switch PC and terminal settings Parameter Value Data set ready DSR signal Ready to send RTS signal Ignored Procedure job aid Modem settingsModem settings Setting Value Disconnect Connecting a network management station to the switch Setting Value UTP/STP 550 m @ See Note None Ethernet ports Fiber-optic cable OC-3 125 µm None OC-3 or Single-mode 15 kmOhm coaxial None 450 ft DS-3 or Cable 137 m 8683POSM OC-3 125 µm None OC-3 Single-mode 15 km Fiber-optic cable Procedure steps Managing cables 8010co chassis Managing cables 8010, 8006, 8003 chassis 8672ATME 8672ATMM 8683POSM Initializing the 8672ATME, 8672ATMM, and 8683POSM modulesImage ﬁlenames for 8672ATME/8672ATMM/8683POSM Module Image filename Initializing the 8672ATME and 8672ATMM modules Unsuccessful download screen output ATM card in slot number is online Initializing the 8683POSM module POS card in slot number is online 101 Standards supported Environmental specificationsGeneral speciﬁcations Data rate and encoding Performance specifications 64-byte packets Address database Safety agency approvals Electromagnetic emissions Connector type Physical specificationsElectrical specifications GBICs See Note 1000BaseSX 400 To-4 850 1000BaseSX 62.5 160 850See Note 1000BaseSX 62.5 200 850 1000BaseSX 500 To-4 850 1000BaseT Gbic Cable specificationsHeight .8 cm Port connectors Bidirectional Data D Bidd Connector Pin number SignalBidirectional Data D + BIDD+ 197 887 hr Optical specifications Height .8 cm Width 15.4 in .1 cm Depth 18.5 in .0 cm Weight 147 602 hr Input power Maximum Thermal rating 396 Btu/hr maximum 178 403 hr 320 972 hr Input power Maximum Thermal rating 193 Btu/hr maximumWavelength 1300 nm Optical budget 177 525 hr Input power Maximum Thermal rating 614 Btu/hr maximumGigabit Ethernet SFP transceivers Height 13.4 mm Width Single-mode fiber optic LC Depth 22 in 54.4 mm Weight Varies with transceiver typeMultimode fiber optic LC or MT-RJ 217 744 hr Type Category 5 copper unshielded twisted pair Input power1000BaseT transceiver Maximum distance 328 ft 100m 190 803 hr Maximum Thermal rating 614 Btu/hr maximumHeight .8 cm Width 244 708 hr 15.4 in .1 cm Depth 18.5 in .0 cm Weight Lb 3.6 kgInput power Maximum Thermal rating 261 Btu/hr maximum Input receive data + RX+ 162 000 hr Input power 100 W Thermal rating 0 50 CConnector types Pluggable Small Form Factor Optics SFP modules 222 103 hr OC-3c MDA MT-RJ OC-12c MDA Duplex SC 8681XLR module Compatible with STM-64 Module Performance 64 byte packets Compatible with STM-64 Yes 10GBaseLW 1310nm serial PMD 255 693 hr 184 230 hr 10.3125 Gb/s with 64b/66b encoding XFPs LC Duplex Port type 10GBaseR/W 10.3125 Gb/s LAN or 9.953 Gb/s WAN with 64b/66b encodingDependent on GBIC, XFP, or SFP Management port TXD Output RXD Input DSR Input DTR Output Console serial portModem serial port DTR Output DSR Input CTS Input RTS Output DCE DB-25 Pin assignments DTE to DCE Switch Modem Signal Pin numberInput power Maximum Thermal rating 241 Btu/hr maximum 355 643 hr Pin assignments 8692omSF module Connector Pin number Signal Modem serial port Copyright 2005-2007, Nortel Networks 135 Procedure steps CPU daughter card installation kit Aligning the CPU daughter card connectors Copyright 2005-2007, Nortel Networks Installing the jumper on an ESM Securing the daughter card to the 8692 Series CPU ESM 8668, P1 connector header P1 connector header, pins 5 P1 connector header with jumper installed Conf slot slot-number state en Index Description 37, 37 Index Index Index Index Page Installation Modules