8616GTE module LEDs | Nortel Networks 8004AC, 8005DC, 8003AC

32Metro Ethernet Routing Switch 8600 modules

8616GTE module

The 8616GTE module ("8616GTE module" (page 32)) provides 16 1000BaseT, copper Gigabit Ethernet ports with 8-pin modular (RJ-45) connectors. Each port operates in 1000 Mb/s (1 Gb/s) full-duplex mode and supports the IEEE 802.3ae standard. Distances of up to 100 meters are obtainable with Category-5 unshielded twisted pair (UTP) cable.

8616GTE module

"8616GTE module LEDs" (page 32) shows the location of the 8616GTE module LEDs.

8616GTE module LEDs

"8616GTE module LEDs" (page 32) describes the 8616GTE module LEDs.

8616GTE module LEDs

Type	Label	Color/State	Meaning

Port	Link	Green/Steady	The port has established a link and is enabled.

		Amber/Steady	The port is connected, but an error condition is
			detected.

		Off	The port is disabled or has no link.

	Activity	Green/Blinking	The port is receiving data.
			Note that as port utilization increases, this LED
			may blink so fast that it appears to be steady.

Nortel Metro Ethernet Routing Switch 8600

Installation — Modules

NN46220-306 02.02 Standard

4.27 July 2008

Copyright © 2005-2007, Nortel Networks

Image 32

Nortel Networks 8004AC, 8005DC, 8003AC, 8004DC, 8005AC manual 8616GTE module LEDs Type Label Color/State Meaning

Contents

Installation Modules Ices statement Canada only Statement of conditionsInternational regulatory statements of conformity CE marking statement Europe only Vcci statement Japan/Nippon onlyEN 55 022 statements EN 55 024 statement EN 60 950 statement Bsmi statement for 8010, 8006 and 8003 chassis Taiwan onlyNOM statement 8010, 8006, and 8003 chassis Mexico only Información NOM unicamente para México Nortel Networks Inc. software license agreement General Page Contents Copyright 2005-2007, Nortel Networks Installing the jumper on an ESM 139 Contents Document changes FeaturesOther changes New in this release Prerequisites Navigation Introduction Metro Ethernet Routing Switch 8600 modules Metro Ethernet Routing Switch 8600 modules Copyright 2005-2007, Nortel Networks 8003 8006 8010 Module type Port type 8010co DS-3 MDA Metro Ethernet Routing Switch 8600 R module feature set 8683POSM OC-3c MDA See Note OC-12c MDA Metro Ethernet Routing Switch 8600 modules Mode conﬁguration requirements QoS and Trafﬁc Filters NN46220-508 8608GBE/8608GBM module ESM 8668 Metro Ethernet Services Module8608GBE and 8608GBM modules 8608GBE/8608GBM module LEDs Type Label Color/State Meaning Gbic order number Gbic type8608GBE/8608GBM module LEDs 8608GTE and 8608GTM modules Type Label Color/State Meaning 8608GTE/8608GTM module LEDs Type Label Color/State Meaning 8608GTE/8608GTM module8608GTE/8608GTM module LEDs Type Label Color/State Meaning 8608SXE module LEDs 8608SXE module8608SXE module 8608SXE module LEDs Type Label Color/State Meaning 8616GTE module 8616GTE module8616GTE module LEDs 8616GTE module LEDs Type Label Color/State Meaning 8616SXE module 8616SXE module LEDs Type Label Color/State Meaning 8616SXE module8616SXE module LEDs 8624FXE module 8624FXE module LEDs Type Label Color/State Meaning 8624FXE module8624FXE module LEDs 8630GBR module 8630GBR module 8630GBR qualiﬁed SFP transceivers SFP order number SFP type 8630GBR module LEDs 8630GBR module LEDs Type Label Color/State Meaning M mode conﬁguration requirements 8632TXE and 8632TXM modules 8632TXE/8632TXM module 8632TXE/8632TXM module LEDs 8632TXE/8632TXM module LEDs Type Label Color/State Meaning Gbic 8648GTR module LEDs 8648GTR module8648GTR module 8648GTR module LEDs Type Label Color/State Meaning 8648TXE and 8648TXM modules 8648TXE/8648TXM module 8648TXE/8648TXM module LEDs 8648TXE/8648TXM module LEDs Type Label Color/State Meaning Type Label Color/State Meaning Metro ESM Metro ESM 8668 LEDs Label Color/State Meaning 8672ATME/8672ATMM module with an OC-12c/STM-4 MDA 8672ATME and 8672ATMM modulesLabel Color/State Meaning 8672ATME/8672ATMM module LED Color/State Meaning 8681XLR module 8681XLR module 8681XLR module LEDs 8681XLR module LEDs Type Label Color/State Meaning 8681XLW module 8681XLW module 8681XLW module LEDs 8681XLW module LEDs Type Label Color/State Meaning 8683POSM module 8683POSM module with an OC-12c/STM-4 MDA 8683POSM module LED Color/State Meaning 8683XLR module 8683XLR module8683XLR qualiﬁed XFP transceivers XFP order number XFP type AA1403005 10GBaseSR AA1403001 10GBaseLR Both Blinking Port is disabled Green XFP order number XFP typeAA1403003 10GBaseER AA1403006 10GBaseZR 8683XLR module LEDs Type Label Color/State Meaning 8683XZR qualiﬁed XFPs XFP order number XFP type 8683XZR module8683XZR module 8683XZR Module LEDs 8683XZR Module LEDs Type Label Color/State Meaning 8691omSF module 8691omSF module Metro Ethernet Routing Switch 8600 modules 8691omSF module LEDs 8691omSF module LEDs Label Color/State Meaning Ethernet management port CPU DCE/DTE switch Reset button8692omSF module Serial ports 8692omSF module LEDs 8692omSF module LEDs 8692omSF module LEDs Label Color/State Meaning Ethernet management port Reset button Removing a ﬁller panel Procedure steps Step Action Prerequisites Installing a ﬁller panelInstalling and replacing a module Navigation Removing a module Conf slot slotnum state disable Loosening screws on the module 8003, 8006, and 8010 chassis Loosening screws on the module 8010co chassis Ejecting the module from the chassis 8010co chassis Removing a module 8003, 8006, and 8010 chassis Installing a module Removing a module 8010co chassis Installing a module 8003, 8006, and 8010 chassis Electrostatic discharge can damage hardware Installing a module 8010co chassis Seating the backplane connectors 8010co chassis Conf slot slotnum state enable Connecting a PC or terminal to the switch Connecting a modem to the switchProcedure job aid PC and terminal settings PC and terminal settings Parameter Value Procedure job aid Modem settings Modem settings Setting ValueData set ready DSR signal Ready to send RTS signal Ignored Disconnect Connecting a network management station to the switch Setting Value UTP/STP 550 m @ See Note None Ethernet ports Ohm coaxial None 450 ft DS-3 or Cable 137 m 125 µm None OC-3 or Single-mode 15 kmFiber-optic cable OC-3 8683POSM OC-3 125 µm None OC-3 Single-mode 15 km Fiber-optic cable Procedure steps Managing cables 8010co chassis Managing cables 8010, 8006, 8003 chassis Initializing the 8672ATME, 8672ATMM, and 8683POSM modules Image ﬁlenames for 8672ATME/8672ATMM/8683POSM Module8672ATME 8672ATMM 8683POSM Image filename Initializing the 8672ATME and 8672ATMM modules Unsuccessful download screen output ATM card in slot number is online Initializing the 8683POSM module POS card in slot number is online 101 Environmental specifications General speciﬁcationsStandards supported Data rate and encoding Performance specifications 64-byte packets Address database Safety agency approvals Electromagnetic emissions Physical specifications Electrical specificationsConnector type GBICs 1000BaseSX 62.5 160 850 See Note 1000BaseSX 62.5 200 850See Note 1000BaseSX 400 To-4 850 1000BaseSX 500 To-4 850 Height .8 cm Cable specifications1000BaseT Gbic Port connectors Connector Pin number Signal Bidirectional Data D + BIDD+Bidirectional Data D Bidd 197 887 hr Optical specifications Height .8 cm Width 15.4 in .1 cm Depth 18.5 in .0 cm Weight 147 602 hr Input power Maximum Thermal rating 396 Btu/hr maximum 178 403 hr Wavelength 1300 nm Optical budget Input power Maximum Thermal rating 193 Btu/hr maximum320 972 hr Input power Maximum Thermal rating 614 Btu/hr maximum Gigabit Ethernet SFP transceivers177 525 hr Height 13.4 mm Width Depth 22 in 54.4 mm Weight Varies with transceiver type Multimode fiber optic LC or MT-RJSingle-mode fiber optic LC 217 744 hr Input power 1000BaseT transceiverType Category 5 copper unshielded twisted pair Maximum distance 328 ft 100m Height .8 cm Width Maximum Thermal rating 614 Btu/hr maximum190 803 hr 15.4 in .1 cm Depth 18.5 in .0 cm Weight Lb 3.6 kg Input power Maximum Thermal rating 261 Btu/hr maximum244 708 hr Input receive data + RX+ Input power 100 W Thermal rating 0 50 C Connector types162 000 hr Pluggable Small Form Factor Optics SFP modules 222 103 hr OC-3c MDA MT-RJ OC-12c MDA Duplex SC 8681XLR module Compatible with STM-64 Module Performance 64 byte packets Compatible with STM-64 Yes 10GBaseLW 1310nm serial PMD 255 693 hr 184 230 hr 10.3125 Gb/s with 64b/66b encoding XFPs LC Duplex Dependent on GBIC, XFP, or SFP 10.3125 Gb/s LAN or 9.953 Gb/s WAN with 64b/66b encodingPort type 10GBaseR/W Management port Console serial port Modem serial portTXD Output RXD Input DSR Input DTR Output DTR Output DSR Input CTS Input RTS Output Pin assignments DTE to DCE Switch Modem Signal Pin number Input power Maximum Thermal rating 241 Btu/hr maximumDCE DB-25 355 643 hr Pin assignments 8692omSF module Connector Pin number Signal Modem serial port Copyright 2005-2007, Nortel Networks 135 Procedure steps CPU daughter card installation kit Aligning the CPU daughter card connectors Copyright 2005-2007, Nortel Networks Installing the jumper on an ESM Securing the daughter card to the 8692 Series CPU ESM 8668, P1 connector header P1 connector header, pins 5 P1 connector header with jumper installed Conf slot slot-number state en Index Description 37, 37 Index Index Index Index Page Installation Modules