Nortel Networks 8003AC, 8005DC, 8004AC Gbic order number Gbic type, 8608GBE/8608GBM module LEDs

26Metro Ethernet Routing Switch 8600 modules

GBIC order number	GBIC type
AA1419004	1000BaseZX
AA1419041	1000BaseT
AA1419017-9024	CWDM wavelengths 1470nm-1610nm

Only GBICs that Nortel qualified are supported for use in the 8608GBE Module. GBICs that Nortel did not qualify can operate within the module, but were not tested for power draw, electromagnetic interference, and interoperability.

For more information about the GBICs and instructions for installing them, see Nortel Installation — SFP, XFP, and GBIC Hardware Components (NN46225-301).

"8608GBE/8608GBM module LEDs" (page 26) shows the location of the 8608GBE and 8608GBM module LEDs.

8608GBE/8608GBM module LEDs

"8608GBE/8608GBM module LEDs" (page 26) describes the 8608GBE and 8608GBM module LEDs.

8608GBE/8608GBM module LEDs

Type	Label	Color/State	Meaning
Port	TX	Green/Blinking	The port is transmitting data.
		Amber/Steady	A fault condition exists on the line or on
			the attached remote device.
		Off	The port did not detect a fault condition.
	RX	Green/Steady	The port has a link and is enabled.
		Green/Blinking	The port is receiving data.
		Amber/Steady	The port has either no optical signal or
			no link synchronization.
		Off	The port has signal but no link.

Nortel Metro Ethernet Routing Switch 8600

Installation — Modules

NN46220-306 02.02 Standard

4.27 July 2008

Copyright © 2005-2007, Nortel Networks