Nortel Networks 8004AC manual 8683POSM OC-3, 125 µm None OC-3 Single-mode 15 km Fiber-optic cable

92Installing Metro Ethernet Routing Switch 8600 modules and connecting equipment

			Recommended	Minimum	Maximum
Module	Port	Connector		cable	cable
			cable type
				length	length
8683POSM	OC-3	MT-RJ	9/125 µm	None	9.3 mi
OC-3			single-mode		(15 km)
			fiber-optic cable
	OC-3	MT-RJ	62.5/125 µm	None	1.24 mi
			multimode		(2 km)
			fiber-optic cable
8683POSM	OC-12	Duplex SC	9/125-µm	None	9.3 mi
OC-12			single-mode		(15 km)
			fiber-optic cable
	OC-12	Duplex SC	62.5/125 µm	None	1640 ft
			multimode		(500 m)
			fiber-optic cable
8683XLR	10GBase-	Duplex LC	See Note 5	None	See Note 5
	LR port
8683XZR	10GBaseR	Duplex LC	See Note 5	None	See Note 5
	port
8691omSF	Ethernet	RJ-45	EIA Category 3,	None	328 ft
	Manage-		4, or 5 UTP for		(100 m)
	ment port		10 Mb/s operation;
			EIA Category 5
			UTP required
			for 100 Mb/s
			operation
	Serial ports	DB-9	RS-232
8692omSF	Ethernet	RJ-45	EIA Category 3,	None	328 ft
	Manage-		4, or 5 UTP for		(100 m)
	ment port		10 Mb/s operation;
			EIA Category 5
			UTP required
			for 100 Mb/s
			operation
	Serial ports	DB-9	RS-232

Note 1: Ports on the 8632TXE, 8632TXM, 8648TXE, and 8648TXM modules are wired as MDI-X. Use straight-through cables to connect these ports to MDI connections such as workstations or servers. Use crossover cables to connect these ports to other MDI-X connections such as hubs or other switches.

Note 2: Depends on installed GBIC model; for specifications, see Nortel Installation — SFP, XFP, and GBIC Hardware Components (NN46225-301).

Note 3: Depends on installed SFP model; for specifications, see Nortel Installation — SFP, XFP, and GBIC Hardware Components (NN46225-301).

Nortel Metro Ethernet Routing Switch 8600

Installation — Modules

NN46220-306 02.02 Standard

4.27 July 2008

Copyright © 2005-2007, Nortel Networks