Removal of the microSD Card

1.Locate the microSD card slot on the underside of the device and flip open the microSD card slot cover.

2.Firmly press the card into the slot and release it. The card should pop partially out of the slot.

Note: You may need to use the tip of the included Stylus to push the card into the slot.

3.Remove the card from the slot.

4.Place the microSD card cover back over the slot.

Rebooting the Device After a Lockup

The Reset button allows you to quickly turn off the device in the event of a program or application error. In this case your Mondi™ would appear to “freeze” and become unresponsive.

1.Turn the device over and locate the Reset button positioned adjacent to the Power button (seen below).

Reset Slot

RESET

2.Firmly insert the soft plastic tip of the included Stylus into this slot or until the device exits the current screen and cycles power to the device (turns off then back on)

(page 4).

Note: This reset action retains all of your device’s default parameters and settings. This action is similar to that of a soft reset function on your computer which only restarts the machine while maintaining all current data intact.

Introduction 10