Initial Device Setup
If your device has never been powered on before and is initializing for the first time, you will need to follow these procedures. These same steps are necessary if the device is ever Hard Reset (to factory default parameters).
1.Touch the main Windows Mobile 6.1 screen to begin the initialization process.
2.Remove the Stylus from the side compartment (adjacent to the Left Action key) (seen below).
Left Action key
3.Use your stylus to calibrate the touch accuracy of the screen by both accurately and firmly touching the center of each onscreen crosshair. Repeat this process for every crosshair that appears until this step has successfully completed.
Note: This process may need to be repeated to accurately calibrate the device. Once successfully calibrated, you are directed onto the Time and Date screen.
Stylus
Introduction 4