3.Replace the cover by lining up the tabs and then firmly sliding the cover away from the lens until it snaps into place.

Replacing the Battery

If there is a need to replace the pre-installed battery, follow these instructions.

Warning!: Do not handle a damaged or leaking Li-Ion battery as this action can result in being burned.

1.Make sure the device is powered off. For more information, refer to “Powering Off your Device” on page 3.

2.In a single motion, press down on the cover and slide it away from the lens and then carefully lift the battery cover away from the device.

3.Slide your finger into the removal grooves (1) and carefully remove the previous battery from the battery compartment

(2).

7