WASHING PROCEDURE
TO WASH
1. Before starting washing, check the following;
Connect the water supply hose and open the water tap.
-Lay the drain hose down toward a sinkhole. (In case no drain pump)
-Place the drain hose in sink or bath.
(In case drain pump)
2.Set the WASH SELECTOR KNOB to the desired mode.
3.Set the CYCLE SELECTOR KNOB to
‘WASH ● RINSE’. (In case drain pump “WASH”)
4. Set the WATER SELECTOR KNOB to WASH . FOR B TYPE
6.Fill water in the wash tub and add the detergent.
7. Set the WASH TIMER
8.After washing,set the
CYCLE SELECTOR KNOB to ‘DRAIN’ for drain.
5. Load laundry in the wash tub.
SPIN DRY
1.Transfer the clothes into the spin basket and arrange the clothes evenly.
2.Be sure to attach the safety cover and close the inner lid.
inner lid
safty cover
3. Close the spin dryer lid.
4. Set the SPIN DRY TIMER
(or
3
