RINSING
1. Set the CYCLE SELECTOR KNOB to ‘WASH RINSE’. (In case drain pump “WASH”)
2.Supply the proper amount of water as not to overflow the top of the washing tub.
OVER FLOW RINSE
1.Keep suppling water
Adjust water pressure to ensure that the amount of water supplied
does not exceed that water drained.
(Without pump) | (With pump) |
2.Set the WASH TIMER 6~8minutes.
3. Set the WASH TIMER 2~3minutes.
4. Drain the water. Set the CYCLE SELECTOR KNOB to ‘DRAIN’
5.Repeat this cycle until drain water is clean. (2~3 cycles)
3.As soon as the WASH TIMER shuts off, turn off the water tap.
4.Set the CYCLE SELECTOR KNOB
to ‘DRAIN’.
ADDITIONAL RINSE
1 | After rinsing you can select this |
| After stopping water |
course for more effective rinse |
| ||
| 4 supply, cover the | ||
(Don't select only this course | inner lid | ||
| for rinse.) Load the laundry | safety cover | laundry with safety cover |
| evenly into the spin basket. | and close the inner lid. | |
|
| ||
| Set the WATER SELECTOR KNOB to |
| 5 lid.Close the spin dryer |
2 SPIN and CYCLE |
| ||
| SELECTOR KNOB to |
|
|
| ‘DRAIN’. |
|
|
| Supply water for about 1minute. |
| Set the SPIN DRY |
3 Adjust the water flow to prevent |
| 6 TIMER 2~3 minutes. | |
| overflow from the wash tub. |
|
|
4
