S P E C I A L F E AT U R E S
Setting Up Your Remote Control to Operate Your Cable Box
1
Turn off your cable box.
2
Press the MODE button and make sure that the CABLE LED is illuminated.
▼ The remote control has five “modes”: “TV”, “STB”,“VCR”, “Cable” and “DVD”.
Press the “MODE” button to switch the remote control to the “Cable” mode.
3
On your Samsung remote control, press the SET button.
4
Enter 3 digits of the cable box code listed on the 78 page for your brand of cable box.
5
Press the POWER button. Your cable box should turn on. If your cable box turns on, your remote control is now “set up” correctly.
6
Once your remote control is set up, press the MODE button any time you want to use the remote to operate your cable box.
▼ Make sure you enter 3 digits of the code, even if the first digit is a “0”. (If more than one code listed, try the first one.)
▼ If your cable box does not turn on, repeat steps 2, 3 and 4, but try one of the other codes listed for your particular brand of cable box.
▼ When your remote control is in the “CABLE” mode, the volume buttons still control your TV’s volume.
77
