Samsung TX-S3079WH, TX-S3080WH, TX S3080WH Operation, Connecting an Amplifier/DVD Home Theater

Connecting an Amplifier/DVD Home Theater

	1.
Amplifier/DVD Home Theater	TV Rear Panel
Audio Cable (Not supplied)

➢Each external input source device has a different back panel configuration.

➢When connecting an external device, match the color of the connection terminal to the cable.

Connect Audio Cables between the AV OUT [L- AUDIO-R] on the TV and AUDIO IN on the Amplifier/DVD Home Theater.

When an audio amplifier is connected to the “AUDIO OUT [L-AUDIO- R]” terminals: Decrease the gain (volume) of the TV, and adjust the volume level with the Amplifier’s volume control.

Operation

Turning the TV On and Off

Press the POWER button on the remote control.

You can also use the POWER button on the TV.

Plug & Play Feature

When the TV is initially powered on, basic customer settings proceed automatically and subsequently:

1.Press the POWER button on the remote control.

Menu language, Channels				The message “Menu language, Channels and Time will be set.” is displayed.
and Time will be set .
				Press the ENTER button, then “Select the language of the OSD.” menu is
	Start			automatically displayed.
				2. Press the ENTER button to enter the language.
	Plug & Play
Select the language of the OSD.				Press the ￿ or ￿ button to select language, then press the ENTER button.
				“Select the antennas to memorize.” menu is automatically displayed.
Language
		English
		Español
		Français
Move	Enter		Skip

Plug & Play

Select the antennas to memorize.

Air		Start
Cable		Start
Air + Cable		Start
Move	Enter	Skip

3.Press the ￿ or ￿ button to memorize the channels of the selected connection. Press the ENTER button to select “Start”.

➢If the antenna is connected to ANT 1(AIR), select “Air” and if it is connected to ANT 2 (CABLE), select “Cable”.

➢If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the “Air + Cable”.

➢In Cable mode, you can select the correct signal source among “STD”, “HRC”, and

“IRC” by pressing the ˇ button, then press the ￿ or ￿ button. Press the ˆ button to select “Start”, then press the ENTER button.

Contact your local cable company to identify the type of cable system that exists in your particular area.

Continued...

English-13