Samsung TX-S3079WH, TX-S3080WH, TX S3080WH manual Changing Channels

If you want to reset this feature...

Setup

Plug & Play			ˆ
Language	: English		ˆ
Time			ˆ
V-Chip			ˆ
Caption			ˆ
Menu Transparency: Medium			ˆ
Blue Screen	: Off		ˆ
Function Help	: On		ˆ
Move	Enter	Return

Menu language, Channels and Time will be set .

Start

1.Press the MENU button to display the menu.

Press the ￿ or ￿ button to select “Setup”, then press the ENTER button.

2.Press the ENTER button to select “Plug & Play”.

For further details on setting up options, refer to the pages 13~14.

➢Plug & Play can only be accessed in the TV mode.

Changing Channels

Using the Channel Buttons

1. Press the CH or CH button to change channels.

➢When you press the CH or CH button, the TV changes channels in sequence.

You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 17 to memorize channels.

Using the Number Buttons

Use the number buttons to quickly tune to any channel.

1. Press the number buttons to go directly to a channel. For example, to select channel 27, press “2,” then “7.”

The TV will change channels when you press the second number.

Using the “-” Button

The “-” button is used to select channels that broadcast a digital signal.

1. For example, for channel 7 (digital), press “7”, then “-”, then “1”.

HD indicates the TV is receiving a digital High Definition signal. SD indicates the TV is receiving an analog Standard Definition signal.

Using the PRE-CH Button to select the Previous Channel

1. Press the PRE-CHbutton.

The TV will switch to the last channel viewed.

➢ To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the PRE-CHbutton to quickly alternate between them.

English-15