Picture Control
Using Automatic Picture Settings
Your TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, “Custom”) that are preset at the factory. You can activate either Dynamic, Standard, Movie, or Custom by making a selection from the menu.
Picture
Mode | : Dynamic | ˆ |
Size | : 16:9 | ˆ |
Tilt |
| ˆ |
Film Mode | : Off | ˆ |
1.Press the MENU button to display the menu.
Press the or button to select “Picture”, then press the ENTER button.
Move 
Enter 
Return
Mode
Mode |
| : DynamicDynamic |
| |
Contrast |
|
| Standard | 100 |
Brightness |
|
| Movie | 45 |
|
| |||
Sharpness |
|
| Custom | 75 |
Color |
|
|
| 55 |
Tint | G 50R50 | |||
Color Tone |
| : Cool1 |
| |
Reset |
|
|
|
|
Move |
| Enter | Return | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mode
Mode | : Dynamic | ˆ | |
Contrast |
|
| 100 |
Brightness |
|
| 45 |
Sharpness |
|
| 75 |
Color |
|
| 55 |
Tint | G 50R50 | ||
Color Tone | : Cool1 |
| ˆ |
Reset |
|
|
|
Move | Enter | Return | |
Contrast 
100
| Mode |
|
Mode | : Dynamic | |
Contrast |
| 100 |
Brightness |
| 45 |
Sharpness |
| 75 |
Color |
| 55 |
Tint | G 50R50 | |
Color Tone | : Cool1 |
|
Reset |
|
|
Move | Enter | Return |
2.Press the ENTER button to select “Mode”. Press the ENTER button again.
Press the or button to select the “Dynamic”, “Standard”, “Movie”, or “Custom” picture setting, then press the ENTER button.
s Choose Dynamic to increase the clarity and sharpness of the picture. s Choose Standard for the standard factory settings.
s Choose Movie when watching movies.
s Choose Custom if you want to adjust the settings according to personal preference.
➢Picture mode needs to be adjusted separately for each input.
Press the P.MODE button on the remote control to select one of the standard picture settings.
3.Press the or button to select “Contrast”, “Brightness”, “Sharpness”, “Color”, or “Tint”, then press the ENTER button.
4.Press the ˇ or ˆ button to decrease or increase the value of a particular item. Press the ENTER button.
➢• Each adjusted setting will be stored separately according to its input mode.
•When you make changes to Contrast, Brightness, Sharpness, Color, or Tint, OSD color will also be adjusted accordingly.
5.Press the ENTER button to return to “Mode”.
6.Press the or button to select “Color Tone”, then press the ENTER button.
Continued...
