Connecting Cable TV, Cable without a Cable Box | Samsung TXM 1997

I N S TA L L AT I O N

Antennas with 75-ohm Round Leads

1

Plug the antenna lead into the VHF/UHF

terminal on the bottom of the back panel.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires a an optional combiner-adaptor (available at most electronics shops).

1

Connect both antenna leads to the combiner.

2

Plug the combiner into the VHF/UHF terminal on the bottom of the rear panel.

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1			Because this TV is cable-ready,
			Because this TV is cable-ready,
			you do not need a cable box to view
Plug the incoming cable			unscrambled cable channels.
into the VHF/UHF antenna
terminal on back of the TV.

CHAPTER TWO: INSTALLATION 2.2

Image 15

Samsung TXM 1997, TXM 1967, TXM 1367 Connecting Cable TV, Antennas with 75-ohm Round Leads, Separate VHF and UHF Antennas

Contents

Owner’s Riskofelectricshock Donotopen Thank You for Choosing Samsung With §15.119 of the FCC rules Read these instructions Installation Your New TVOperation Troubleshooting Special Features Chapter One List of Features Familiarizing Yourself with The TV Video and Audio input jacks ´ VHF/UHF Antenna terminal Rear Panel Jacks Sleep Remote Control TypeNumber buttons ¨ +100 ∏ REWRewind ´ Number buttonsErase +100 Press to use your remote con- trol to operate a cable box SET˘ FF Fast Forward Press to use your remote con- trol to operate your VCR Antennas with 300-ohm Flat Twin Leads Connecting VHF and UHF Antennas Cable without a Cable Box Connecting Cable TVAntennas with 75-ohm Round Leads Separate VHF and UHF Antennas Connecting to a Cable Box that Descrambles All Channels Connecting to a Cable Box that Descrambles Some ChannelsConnect this cable to a two-way splitter S TA L L AT I O N Connect an audio cable to the VCR’s Audio OUT terminal Connecting a VCR S TA L L AT I O N Connecting a Camcorder Installing Batteries in the Remote Control Viewing the Menus Press the Power button on the remote controlTurning the TV On and Off Viewing the Menus and On-Screen Displays Selecting a Menu Language Selecting the Video Signal-source Memorizing the ChannelsANT antenna STD, HRC or IRC all cable TV Press the CH button to select Auto program Storing Channels in Memory Automatic Method Press the VOL+ or VOL- button to select Added or Erased Adding and Erasing Channels Manual Method Changing Channels Adjusting the Volume Or CH button repeat- edly until the correct hour appears Setting the Clock Press the Menu button to display the menu Customizing the Picture Using Automatic Picture Settings Auto Volume Viewing a VCR or Camcorder Tape Press the VOL+ or VOL- buttonPress the Menu button twice to exit Setting Up Your Remote Control to Operate Your VCR Customizing Your Remote Control VCR Codes Cable Box Codes Setting Up Your Remote Control to Operate Your Cable Box Fine Tuning Channels Changing the Screen Size Using the Surf Feature Setting the On/Off Timer Press the Sleep button on the remote control Setting the Sleep Timer Viewing Closed Captions Using the V-Chip Setting Up Your Personal ID Number PINPress the Menu button three times to exit How to Set up Restrictions Using the TV guidelines How to Enable/Disable the V-Chip TV-14 TV-Y Young children TV-Y7 Children 7 and overGeneral audience Parental guidance E C I a L FE AT U R E S General audience no restrictions Repeatedly press the CH Button to select a Chapter Five Identifying Problems Cleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications