Storing Channels in Memory Automatic Method | Samsung TXM 1967

O P E R AT I O N

Storing Channels in Memory (Automatic Method)

1

First, select the correct signal source (ANT, STD, HRC, IRC). See steps 1~3 on previous page.

Press the MENU button, then press the CH ▼ but- ton twice to select “Channel,” then press the VOL + button.

2

Press the CH ▼ button to select “Auto program”.

3

Press the VOL + button. The TV will begin memorizing all of the available channels.

4

After all the available channels are stored, the Auto program menu reap- pears. Press the MENU button twice to exit.

The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes.

Press the MENU button at any time to interrupt the memorization process and return to the Channel menu.

CHAPTER THREE: TV OPERATION 3.4

Image 25

Samsung TXM 1967, TXM 1997 manual Storing Channels in Memory Automatic Method, Press the CH button to select Auto program

Contents

Owner’s Riskofelectricshock Donotopen Thank You for Choosing Samsung With §15.119 of the FCC rules Read these instructions Your New TV InstallationOperation Troubleshooting Special Features Chapter One List of Features Familiarizing Yourself with The TV Video and Audio input jacks ´ VHF/UHF Antenna terminal Rear Panel Jacks Number buttons Remote Control Type¨ +100 Sleep Erase ´ Number buttons+100 ∏ REWRewind ˘ FF Fast Forward SETPress to use your remote con- trol to operate your VCR Press to use your remote con- trol to operate a cable box Antennas with 300-ohm Flat Twin Leads Connecting VHF and UHF Antennas Antennas with 75-ohm Round Leads Connecting Cable TVSeparate VHF and UHF Antennas Cable without a Cable Box Connecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsConnect this cable to a two-way splitter S TA L L AT I O N Connect an audio cable to the VCR’s Audio OUT terminal Connecting a VCR S TA L L AT I O N Connecting a Camcorder Installing Batteries in the Remote Control Turning the TV On and Off Press the Power button on the remote controlViewing the Menus and On-Screen Displays Viewing the Menus Selecting a Menu Language Memorizing the Channels Selecting the Video Signal-sourceANT antenna STD, HRC or IRC all cable TV Press the CH button to select Auto program Storing Channels in Memory Automatic Method Press the VOL+ or VOL- button to select Added or Erased Adding and Erasing Channels Manual Method Changing Channels Adjusting the Volume Or CH button repeat- edly until the correct hour appears Setting the Clock Press the Menu button to display the menu Customizing the Picture Using Automatic Picture Settings Auto Volume Press the VOL+ or VOL- button Viewing a VCR or Camcorder TapePress the Menu button twice to exit Setting Up Your Remote Control to Operate Your VCR Customizing Your Remote Control VCR Codes Cable Box Codes Setting Up Your Remote Control to Operate Your Cable Box Fine Tuning Channels Changing the Screen Size Using the Surf Feature Setting the On/Off Timer Press the Sleep button on the remote control Setting the Sleep Timer Viewing Closed Captions Setting Up Your Personal ID Number PIN Using the V-ChipPress the Menu button three times to exit How to Set up Restrictions Using the TV guidelines How to Enable/Disable the V-Chip General audience TV-Y Young children TV-Y7 Children 7 and overParental guidance TV-14 E C I a L FE AT U R E S General audience no restrictions Repeatedly press the CH Button to select a Chapter Five Identifying Problems Using Your TV in Another Country Cleaning and Maintaining Your TVSpecifications