Samsung UA32H4303AKXXS Fine-Tuning the Screen, When Aerial Source is set to Terrestrial or Cable

When Aerial Source is set to Terrestrial or Cable

●● Digital Channel Tuning

Scans for a digital channel.

111Select the New.

"" When selecting Aerial → Terrestrial: Channel, Frequency, Bandwidth

––The Bandwidth function may not be supported depending on the region.

"" When selecting Aerial → Cable: Frequency, Modulation, Symbol Rate

222Select the Search. When scanning has finished, a channel is updated in the channel list.

●● Analogue Channel Tuning

Scans for an analogue channel.

111Select the New.

222Set the Programme, Colour System, Sound System, Channel and Search.

333Select the Store. When scanning has finished, a channel is updated in the channel list.

Channel mode

●● P (programme mode)

When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.

●● C (aerial channel mode) / S (cable channel mode)

These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.

Fine-Tuning the Screen

Broadcasting > Channel Settings > Fine Tune Try Now

"" Available for analogue broadcasts only.

Analogue pictures can become shaky and full of noise. If this happens, you can fine-tune the signal and/or reduce noise to clear up the picture.

111Select Channel Settings > Fine Tune. An adjustment bar appears on the screen.

222Press the l or r button to make adjustments. Select Save or Close to apply the new setting. Select Reset to reset the Fine-Tune operation.