Notice

The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter. In such a case, connect the Samsung Wireless LAN Adapter using a USB cable in a place that is not affected by radio interference.

✎✎The Samsung Wireless LAN Adapter should be installed in an interference-free area in order to avoid interference between the adapter and tuner.

Method 1

UA55C9000SR / UA55C9000ZR Connect via an extension cable

Method 2

UA55C9000ZR

Network Setup (Samsung Auto

04

Configuration)

Advanced

This function is available in APs (Access Points) that support

 

Samsung Auto Configuration. If your AP does not support

 

Auto Configuration, you can connect through PBC (WPS),

 

auto, or manually.

Features

✎✎This function is available when SWL(Samsung

 

Wireless Link) is set to Off.

 

✎✎You can check for equipment that supports Samsung

 

Auto Configuration on www.samsung.com.

 

How to set up using Samsung Auto Configuration1.Place the AP and TV next to each other and turn themon.✎✎ Because the booting time of applications differ,

you may have to wait for approximately 2 minutes. ✎✎ If the LAN cable connected the WAN port of AP

during Samsung Auto Configuration, you are able to complete until internet connection test. If you do not connect, Samsung Auto configuration will check only device connecting of AP (Not check internet).

2.After 2 minutes, connect the Samsung Wireless LAN Adapter to the TV. When the Samsung Wireless LAN Adapter is established, the pop-up window appears.

3.As soon as a connection is established, place the AP in parallel with the Samsung Wireless LAN Adapter giving a gap no larger than 25cm.

4.Wait until the connection is automatically established. ✎✎ If Samsung Auto Configuration does not connect your TV to your AP, a pop-up window appears

on the screen notifying you of the failure. Reset the AP, and then try again. If the connection fails again, choose one of the other connection setup methods, PBC (WPS), auto, or manual.

5.After the connection is established, locate the sharer atthe desired location.

✎✎ If the AP settings have been changed or it is the first time you use the new AP after purchase, you need to set up again beginning from Step 1.

English 31

[UC9000]BN68-03034A-02Eng.indb 31

 

 

2010-05-28 오후 2:29:00