Samsung UA55HU7000WXSQ, UA55HU7200KXXV, UA55HU7000KXXV, UA65HU8500KXXV, UA50HU7000KXXV, UA55HU8500KXXV

The Problem

Try this!

The Anynet+ device

won't play.

You cannot use the play function when Setup is in progress.

Check whether the device supports Anynet+.

Check whether the HDMI cable is properly connected.

Go to System and see if Anynet+ (HDMI-CEC)has been set to On.

The connected device

Scan for Anynet+ devices again.

is not displayed.

Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the

device is connected to your TV with an HDMI cable. Some HDMI cables may not support Anynet+.

If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected, please scan for the device again.

The TV audio is not

Connect an optical cable to the TV and the receiver.

ARC enables digital sound to be outputted via the HDMI (ARC) port.

being played through

the receiver.

However, ARC is only available when the TV is connected to an audio receiver that supports ARC.