Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically. ✎✎Preset: Connecting the mains and antenna.

✎✎If the size of the cable mold part was an abnormal shape, the part may not be connected to the input port properly.

VHF/UHF Antenna

Cable

or

ANT OUT

Power Input

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Plug & Play is available only when the Input source is set to TV.

✎✎To return to the previous step, press the Red button.
Started Getting 01

 

 

1

Selecting a language

2

Selecting Store Demo
or Home Use

3

Selecting a country

4

Selecting an antenna

5

Selecting a channel

6

Setting the
Clock Mode

7

Time Zone

8

Viewing the HD
Connection Guide.

9

Enjoy your TV.
Press the ▲ or ▼ button, then press the ENTEREbutton.

POWER

Select the desired OSD (On Screen Display) language.

P

Press the ◄ or ► button, then press the ENTEREbutton.

y

Select the Home Use mode. Store Demo Mode is for retail

 

y environments.

yy Return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.

Press the ▲ or ▼ button, then press the ENTEREbutton.

Select the appropriate country. If the desired country does not exist on the menu, select Others.

✎✎After selecting the country in the Country menu, some models may proceed with an additional option to setup the pin number.

✎✎When you input the PIN number, 0-0-0-0 is not available.Press the ▲ or ▼ button, then press the ENTEREbutton. Select Air or Cable.

Press the ▲ or ▼ button, then press the ENTEREbutton.

Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Auto Store (p.13).

Press the ENTEREbutton at any time to interrupt the memorization process. Set the Clock Mode automatically or manually.

Press the ▲ or ▼ button to select Auto, then press the ENTEREbutton.

Press the ▲ or ▼ button to select the your time zone, then press the ENTEREbutton (depending on the country).

The connection method for the best HD screen quality is displayed.Press the ENTEREbutton.
If You Want to Reset This Feature...

Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to change the PIN number, use the Change PIN function.

English 7