Issues

Solutions and Explanations

 

 

 

 

 

 

The message “Scramble signal”

•• If you are using a CAM CARD (CI/CI+), check that it is installed into the

 

 

or “Weak Signal/No Signal”

common interface slot.

 

 

appears.

•• If there is still a problem, pull the CAM CARD out of the TV and insert it

 

 

 

into the slot again.

 

 

 

 

 

 

You turned the TV off 45

•• It is normal. The TV operates the OTA (Over The Aerial) function itself to

 

 

minutes ago, and it turned on

upgrade firmware downloaded whilst your watching TV.

 

 

again.

 

 

 

 

 

 

 

There are recurrent picture/

•• Check and change the signal/source.

 

 

sound issues.

 

 

 

 

A reaction may occur between

•• To prevent this, use felt pads on any surface of the TV that comes in

 

the rubber cushion pads on the

direct contact with furniture.

 

 

base stand and the top finish of

 

 

 

some furniture.

 

 

 

 

 

 

English