7

01 Getting Started

English

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and ante nna.

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P
button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1Selecting a language Press the ▲ or ▼ button, then press the ENTER
E
button.
Select the desired OSD (On Screen Display) language.
P
POWER
2Selecting Store Demo
or Home Use
Press the ◄ or ► button, then press the ENTER
E
button.
ySelect the Home Use mode. Store Demo Mode is for retail
environments.
yTo return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold MENU for 5 sec.
3Selecting a country Press the ▲ or ▼ button, then press the ENTER
E
button.
Select the appropriate country.
4Selecting an antenna Press the ▲ or ▼ button, then press the ENTER
E
button.
Select Air or Cable.
5Selecting a channel Press the ▲ or ▼ button, then press the ENTER
E
button.
Select the channel source to memorise. When setting the antenna source to Cable, a step
appears allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to Channel → Auto Store (p. 14).
✎
Press the ENTER
E
button at any time to interrupt the memoris ation process.
6Setting the Clock
Mode
Set the Clock Mode automatically or manually.
Press the ▲ or ▼ button to select Auto, then press the ENTER
E
button.
7Time Zone Press the ▲ or ▼ button to select the your time zone, then press the ENTER
E
button.
(depending on the country)
8Viewing the HD
Connection Guide.
The connection method for the best HD screen quality is displayed.
9Enjoy your TV. Press the ENTER
E
button.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to
change the PIN number, use the Change PIN function.
ANT OUT
VHF/UHF Antenna
or
Cable
[UC8000]BN68-02697D-Eng.indb 7 2010-04-02 오후 7:54:46