Samsung UE55C, UE46C user manual 248, Prevention of Afterimage Burn-in, What is afterimage burn-in?

Prevention of Afterimage Burn-in

Black Matrix	Common	Color-Filter
	Electrode (ITO)

Source Drain

	Gate	Pixel Electrode (ITO)	Storage
			Capaccitor (Cs)
TFT
Data Bus-Line

What is afterimage burn-in?

Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that control the liquid crystals.

Such a voltage difference between electrodes increases with time and makes the liquid crystals thinner. When this occurs, a previous image can remain on the screen when the pattern changes. To prevent this, the accumulated voltage difference should be reduced.

――Afterimage burn-in should not occur when an LCD panel is operating in proper conditions.

Preventing afterimage burn-in

――The best way to protect the product from afterimage burn-in is switching the power off or setting the PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending on instruction guide.

•• Powering Off, Screen Saver and Power Saving Mode

-- Power off the product for 4 hours after using it for 20 hours. -- Power off the product for 2 hours after using it for 12 hours.

-- Go to Display Properties > Power Supply on your PC and set the product to power off as required. -- Using a screen saver is recommended.

It is best to use a single-colour or moving-image screen saver.

•• Regular colour Change -- Use 2 colours

Switch between 2 colours every 30 minutes as shown above.

Type 1

FLIGHT	TIME
OZ348	20:30
UA102	21:10

Type 2

FLIGHT	TIME
OZ348	20:30
UA102	21:10

248