Samsung UE55ES8000UXXU, UE40ES8000UXXU manual Select Country

5	Select Country.
	(Depending on the
	country)
6	Auto Tuning (1):
	Selecting how you
	watch your TV
7	Auto Tuning (2):
	Selecting a search

options and Region Selection (Depending on the country)

8	Clock: Setting the
	Clock Mode
9	Time Zone
	(Depending on the

country): Setting the your Time Zone

Select the appropriate country.

✎✎ After selecting the country in the Country menu, some models may proceed with an additional option to setup the pin number.

Let’s find and store channels on your TV. Do you need to search for channels?

•• Yes, I need to.: All the channels available will be found and stored on your TV.

•• No, I don’t need to.: My set-top box provides all the channels that are available, so I don't need to search for channels.

Select the channel source to memorise. When setting the aerial source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Auto Tuning (Channel Menu → Memorizing Channels) in the e-Manual.

✎✎ When Air or Cable is selected first: After all Air or Cable channels are stored, the step for storing Satellite channels is displayed.

✎✎ When Satellite is selected first: After all Satellite channels are stored, the step for storing Air or Cable channels is displayed.

✎✎ Select Stop at any time to interrupt the memorization process.

•• Auto: Set the current time automatically.

•• Manual: Allows you to manually set the current date and time. This step is only available when the clock mode is set to Auto.

•• Auto: Set the time zone automatically.

•• Manual: Set the time zone manually.

✎✎ If you selected Manual, you can select whether to turn DST (Daylight Savings Time) On or Off. (Depending on the country)

10 Voice and motion control: Setting the Voice and motion control function.

11 Setup Complete

12 Set the Universal

Remote

✎✎ You can turn the Voice and motion control function On or Off. Select Off or On, and then select Next. For more detailed information, refer to “SMART Interaction” (p.17)

Select Close to finish.

✎✎ The completed settings are displayed.

1.Turn on the POWER button on the bottom of the IR Blaster, and then press the PAIRING button.

2.Select Yes to start the Universal Remote Setup.

✎✎ For more detailed information about the Universal Remote Setup, refer to "Setting up the Universal Remote Control" section in the manual (page 30).

If You Want to Reset This Feature...

Menu → System →Setup

Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change the PIN number, use the Change PIN function.

You should do Setup (Menu → System) again at home although you did in shop.

✎✎ If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).

English - 10