Samsung UN46ES8000 user manual Configuring the Basic Settings in Initial Setup

Configuring the Basic Settings in Initial Setup

When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring the TV’s basic settings. Plug the power cord into a wall outlet, and then press the P button to turn on the TV.

✎✎ Use the standard remote to run the Initial Setup.

✎✎ Setup is available only when the input source is set to TV. See "Changing the Input Source" (page 24). ✎✎ To return to the previous step in the Setup sequence, select Previous.

✎✎ If you are not using a cable box or satellite box, make sure you have connected the TV to an antenna or cable connection before you turn on the TV. See page 12 for instructions.

✎✎ If you want to configure a wired network connection during Setup, make sure you've connected a LAN cable to your TV. See pages 36 for instructions. If you want to configure a wireless network connection during Setup, make sure your wireless modem or router is on and working.

1	Menu Language:	After you press the P button, the Start screen appears. Select Next
	Select a Language.	to continue. The Menu Language screen appears. Select the menu

language you want using your remote, and then select Next. The TV will display on-screen menus using the language you select beginning with the next step in the Setup process.

2	Use Mode: Select
	the Home Use

Mode.

On the Use Mode screen, select the Home Use using your remote, and then select Next. The Network Settings screen appears.

✎✎ Store Demo is for retail environments only. If you select Store Demo, some functions will not work, and the TV will reset all functions to their factory default after a certain period of time. For more information about Store Demo, go to the end of this section.

3	Network Settings:
	Configure the

network settings.

✎✎ To configure later, select Skip. You can set up the network connection later using the on- screen Network menu.

To configure your network settings, select Next using your remote, and then go to 3A - Wireless Network or 3B - Wired Network on the next page.

If you do not know your network configuration information or want to configure the settings later, or do not have a network, select Skip, and then go to 5 - Auto Program (1) on page 18.

To configure network settings later, refer to “Setting up the Wired or Wireless Network” in the e-Manual or see the Network Connection sections in this manual (pages 35 and 37).

English - 16

[UE8000 -ZA]BN68-04495A-00Eng.indb 16

2012-10-11 �� 1:16:41