Samsung AK68-01304A Connecting the Antenna Cable, Method1 Antenna + DVD-VCR + TV No Cable box

Chapter 2

C O N N E C T I O N S

Connecting the Antenna Cable

There are several ways to connect your DVD-VCR. Select one of the following antenna connections that best suits you below.

■Method 1: Antenna + DVD-VCR + TV: No Cable box

■Method 2: Antenna +Cable box + DVD-VCR + TV: Cable box with many scrambled channels

■Method 3: Antenna + DVD-VCR + Cable box +TV: Cable box with a few scrambled channels

- If you are using an off-air antenna that has 300-ohm twin flat leads, use an external antenna connector (300-75 ohm adaptor: not supplied) to connect the antenna to the DVD-VCR.

-If you have two separate antennas (one VHF and the other UHF), use a UHF/VHF combiner-adaptor (available at most electronics shops) to connect the antenna to the DVD-VCR.

-The RF OUT(TO TV) jack of this product sends signals received through the antenna

and also outputs Audio/Video signals.

Method1: Antenna + DVD-VCR + TV: No Cable box

You can record non-scrambled channels by selecting the channel on the DVD-VCR. Also use this Method if you watch channels without cable box.

To RF IN

To RF OUT

Antenna cable

To Antenna Input

ENG-13