Troubleshooting

PROBLEM

SOLUTION

 

 

Motor does not start.

• Check cable, plug and socket.

• Leave to cool.

 

 

 

Suction force is

 

gradually decreasing.

 

 

• Check for blockage and remove.

In operation, the

• Please unclog the intake.

vacuum cleaner stops

after repeating runs

 

and stops three times.

 

Cord does not rewind

• Pull the cord out 2-3 m and push down the cord rewind button.

fully.

 

 

 

Vacuum cleaner dows

• Check hose and replace if required.

not pick up dirt.

 

Low or decreasing

• Please check filter and, if required, clean as illustrated in the

instructions. if filters are out of condition change them to new

suction.

ones.

 

Body overheating.

• Please check filters, if required clean as illustrated in the

instruction.

 

 

 

Static electicity

• Please decrease power suction.

• This can also occur when air in the room is very dry.

discharge.

Please ventilate the room till air humidity becomes normal.

 

The vacuum cleaner

• In order to protect the motor in the cleanr, it rotates slowly when

you just turn on the cleaner.

makes a strange

(Before the motor stabilizes,) this causes the loud noise at the

noise.

initial state and it is not failure in the machine.

 

This vacuum cleaner is compliant with the following regulations:

-RTTE Directive(1999/5/EC)

-Electromagnetic Compatibility Directive : 2004/108/EEC

-Low Voltage Directive : 2006/95/EC

The official Declaration of conformity may be found at http://www.samsung.com, go to Support Please search Product Support and enter the model name.

English - 22

DJ68-00701H-09.indb 22

2017. 6. 1.

�� 3:03

Page 22
Image 22
Samsung VC07F70HUYC/EE, VC20F70HNAR/EF, VC20F70HNAR/EN, VC07F70HNRN/EE, VC07F70HNQR/EE manual Troubleshooting, Problem Solution