REPLACING THE DUST BAG

1)To open the dust cover of the dust bag compartment, press the clamper upwards.(The clamper is located at the front of the dust cover)

2)Remove the dust bag from the cleaner.

3)After removing the used dust bag, insert the cardboard bag collar of the new dust bag into its original position.

4)Press the dust cover down gently until the clamper relocks.

FOR CLOTH FILTER BAG

After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.

MAINTENANCE OR REPLACEMENT OF THE FILTERS

INLET FILTER

To protect the motor, your cleaner features a secondary filter at the front of the motor in the dust compartment. Do not allow the filter to become clogged. Suction power reduc- tion or motor damage may result. After cleaning the secondary filter attach it in place.

SECONDARY FILTER

 

SECONDARY FILTER

 

OUTLET FILTER

 

1) Open the grille part, separate the

2) Reassemble it after cleaning or

 

exhausted filter.

replacing the filter in the reverse order.

NOTE: The filters must be completely dried before being replaced in the dust

compartment.

6

Page 7
Image 7
Samsung VC5814VN3K/ERP, VC5814VN3R/SML manual Replacing the Dust BAG, For Cloth Filter BAG, Inlet Filter, Outlet Filter