MAINTENANCE OR REPLACEMENT OF THE FILTERS

INLET FILTER

The secondary filter, located behind the grille in the back of dust bag compartment, protects the motor from dirt particles.

Do not allow the filter to become clogged.

Suction power reduction or motor damage may result. If filter becomes dirty, pull off the grille and lift out filter. After cleaning the secondary filter attach it in place.

NOTE : The filters must be completely dried before being replaced in the dust compartment.

OUTLET FILTER

Open the dust cover and lift off the grille.

USAGE OF FLOOR NOZZLE

FOR RUG / FLOOR SELECTOR

Before use make sure that the position of the selector is in the right position for the type of surface to be cleaned.

Select the carpet indicator when cleaning carpets.

Select flat surface indicator when cleaning the floors, tiles, etc.

FOR UNIVERSAL BRUSH

Use the floor nozzle for cleaning all surfaces.

NOTE: For optimum efficiency, clean floor brush with crevice tool.

TRANSPARENT TUBE

For HEPA Filter Type

HEPA Filter

Preliminary

Filter

Grasp filter and pull it out with preliminary filter. After cleaning preliminary filter, reposition new filter and preliminary filter by reversing this procedure.

For Micro Filter Type

Grille Filter

Micro Filter

Preliminary Filter

Grasp grille filter and pull it out with preliminary filter. After cleaning preliminary filter, reposition new filter compartment and preliminary filter by reversing this procedure.

Transparent tube prevent the tube and hose from being clogged by obstacle like as socks and clothes.

When transparent tube is clogged.

Separate the nozzle from the tube. Remove the alien substance with a stick from it. After cleaning it, reassemble the nozzle to the tube.

EN-10

EN-11

Page 18
Image 18
Samsung VC8916VC3R/BOL manual Maintenance or Replacement of the Filters, Usage of Floor Nozzle, Transparent Tube