DJ68-00093D 1/30/02 10:45 AM Page 8

REPLACING THE DUST BAG

1)To open the dust cover of the dust bag com- partment, press the clamper upwards(the clam- per is located at the front of the dust cover).

3)After removing the used dust bag, insert the cardboard bag collar of the new dust bag into its original position.

2) Remove the dust bag from the cleaner

4)Press the dust cover down gently until the clamper relocks.

NOTE : Used dust bags can be sealed by removing the film from the paper and sticking over the suction opening.

FOR CLOTH FILTER BAG

After using,if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.

DUST-FULL INDICATOR

If the “Dust-Full” indicator switch changes to “RED” while you are cleaning, the dust bag is full and must be replaced.

NOTE : If the “Dust-Full” indicator continues to display “RED” even after changing the dust bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged.

EN-7