- IF YOU HAVE A PROBLEM
This Vacuum cleaner is approved the following.EMC Directive : 89/336/EEC , 92/31/EEC and 93/68/EECLow Voltage Safety Directive : 73/23/EEC and 93/68/EEC
| PROBLEM | CAUSE | REMEDY 0 |
Motor does not start. | No power supply. | Check cable, plug and socket. |
| Thermal | Leave to cool. |
|
|
|
Suction force is gradually | Nozzle, suction hose or tube | Check for blockage and |
decreasing. | is blocked. | remove. |
Cord does not rewind fully. | Check that the cord is not | Pull the cord out |
| twisted or wound unevenly. | push down the cord rewind |
|
| button. |
Vacuum cleaner does not | Crack or hole in hose. | Check hose and replace if |
pick up dirt. |
| required. |
|
|
|
Low or decreasing suction | Filter is full with dust. | Please check filter and, if |
|
| required, clean as illustrated |
|
| in the instructions. |