Samsung VCR8845T3R/XEC, VCR8845T3A/BOL, VCR8845T3A/XET, VCR8845T3A/XTR, VCR8845T3A/XEF Edge Cleaning

Operating the cleaner

Using the robotic vacuum cleaner

EDGE CLEANING

When the Obstacle Sensor detects an obstacle during the cleaning, the Robotic vacuum Cleaner reduces its speed to minimize the bumping impact and the Bumper Sensor also helps it lower the bumping impact.

It cleans the corners by reaching to them as close as possible. (This Robotic vacuum Cleaner is a touching type cleaner.)

The robotic vacuum cleaner will move by itself and automatically clean the house until cleaning is completed once.

■ If cleaning begins when the robotic vacuum cleaner is docked with the charger station, the time to return to the charger is decreased since the robotic vacuum cleaner remembers its original position while moving.

■ If the battery level becomes too low while cleaning, the robotic vacuum cleaner will automatically return to the charger station and resume cleaning after charging its battery. (Number of cleaning operations resumed: Once)

Main unit button Remote control button Configuration Sequence

1 Set the mode.

 5time

2Cancel the mode.

While cleaning

About the Resume Cleaning function

NOTE • If the robotic vacuum cleaner has evaluated that cleaning is complete, the resume cleaning function is not performed.

• If you move the robotic vacuum cleaner when it is being charged or press a button, the robotic vacuum cleaner judges cleaning to be complete and does not resume cleaning.

When cleaning is

complete

Do not move the robotic vacuum cleaner when it is cleaning or press a button

while it is cleaning. Otherwise, the robotic vacuum cleaner judges cleaning to be CAUTION complete and starts cleaning again from the beginning.

32_ Operating the cleaner