Operating the cleaner
Installing the robotic vacuum cleaner
Installing the VIRTUAL GUARDYou can confine the robotic vacuum cleaner to a particular section by using Fence (virtual wall) mode or clean several sections one by one using Guard (virtual door) mode.
| Mode/Power |
Mode Lamp | Button |
| |
| Main Unit |
| Detection |
Distance Detection | Sensor |
| |
Sensor |
|
1. Mode lamp operations
- Fence (virtual wall) Mode: The red lamp flashes.
- Guard (virtual door) Mode: The green lamp flashes.
- Off: The lamp is turned off.
2. Setting the mode
-Whenever you press the Mode/Power button, Fence
(virtual wall) mode ➝ Guard (virtual door) mode ➝
Power off is selected in this sequence.
✽The distance of virtual wall is 2.5M at minimum and may differ depending on surroundings and movement status of the robot.
Forming a Fence (virtual wall)VIRTUAL GUARD creates an invisible barrier that the robotic vacuum cleaner cannot cross.
E.g. in front of pots, furniture, the front door, and so on. |
|
|
|
| Distance | |
|
|
|
|
| ||
|
|
|
|
| Detection | |
1. Select Fence (virtual wall) mode using the Mode/ |
|
|
|
| Sensor | |
| ||||||
|
|
|
|
|
| |
Power button. |
|
|
|
|
|
|
- The mode lamp flashes red. |
|
|
|
|
|
|
|
|
|
|
|
| |
| A fence (virtual wall) | |||||
|
| |||||
2. Install the VIRTUAL GUARD in front of the area |
| is formed. | ||||
|
|
|
|
|
|
you want to block access from the robotic vacuum cleaner.
-Install the VIRTUAL GUARD so that the distance detection sensor can form an invisible barrier that the robotic vacuum cleaner cannot cross.
24_ Operating the cleaner