Bosch Appliances 43.5Audio expander, Procedure, Audio inputs, Audio outputs, Control inputs

Praesideo 3.5 Installation and User Instructions 9 System Configuration

en 360

43.5Audio expander

43.5.1 Procedure

Proceed as follows to configure an audio expander:

1Go to Configure > Equipment configuration > Audio expander. A screen similar to the one in figure 43.29 appears in the main frame of the web interface.

7Submit the changes. Note that the changes are not permanent until the configuration is saved (see section 40.4.4 and section 40.4.5).

43.5.2 Audio inputs

The configuration page for audio expander audio inputs is similar to the configuration page for network controller audio inputs (see section 43.2.3).

figure 43.29: Configure audio expander, step 1

2Click the name of the audio expander that must be configured. A screen similar the one in figure 43.3 appears in the main frame of the web interface.

figure 43.30: Configure audio expander, step 2

3Open the Audio inputs category to configure the audio inputs of the audio expander (see

section 43.5.2).

4Open the Audio outputs category to configure the audio outputs of the audio expander (see

section 43.5.3).

5Open the Control inputs category to configure the control inputs of the audio expander (see

section 43.5.4).

6Open the Control outputs category to configure the control outputs of the audio expander (see section 43.5.5).

43.5.3 Audio outputs

The configuration page for audio expander audio outputs is similar to the configuration page for network controller audio outputs (see section 43.2.4).

43.5.4 Control inputs

The configuration page for audio expander control inputs is similar to the configuration page for network controller control inputs (see section 43.2.5).

43.5.5 Control outputs

The configuration page for audio expander control outputs is similar to the configuration page for network controller control outputs (see section 43.2.6).

Bosch Security Systems 2011-02