Bosch Appliances 3.5 5.6.6Main menu, 9: Faults menu, nA Serial Nr, nB Detail, nC Date/Time, Setup

Praesideo 3.5 Installation and User Instructions 3 Control Equipment

en 97

The Faults ... menu screen itself shows the number of active faults in the system. For example:

Faults	...
27 faults

The numbered menus in the faults menu shows the name of the fault and the unit that generated the fault. For example:

23Overload PAM_01

In this case the fault is Overload, which was generated by the unit named PAM_01. The menu items in the faults menu provide additional information about the selected fault and allow to acknowledge and reset faults (see table 5.9).

Note

In the next table, n indicates the nth fault in the faults menu, whereas N indicates the total number of faults in the faults menu.

table 5.9: Faults menu

Menu item	Description
nA Serial Nr	Shows the serial number of the
	unit that generated the fault n.
nB Detail	Shows the fault detail of fault n.
	See table 5.11.
nC Date/Time	Shows the date and time on
	which fault n occurred.
nD Status	Shows the status of fault n
	See chapter 51
nE Acknowledge	Acknowledge the selected fault.
	See chapter 51.
nF Reset	Reset the selected fault. See
	chapter 51.
N+1 Ack All	Allows to acknowledge all faults
	in the system. See chapter 51.
N+2 Reset All	Resets all faults in the system.
	See chapter 51.

The faults and fault details displayed by the network controller are closely related to the faults that are displayed in the Logging Viewer (see chapter 57). In table 5.11, all faults that can be displayed by the network controller are listed. Use this table in combination with the information in chapter 54 to find out the cause of a fault or the recommended action to take.

5.6.6Main menu

The Menu ... item (see figure 5.12) provides access to the main menu.

table 5.10: Main menus

Menu item		Description
1	Monitoring	Go to the Monitoring submenu.
		See section 5.6.7.
2	Setup	Go to the Setup submenu. See
		section 5.6.8 (and further).

Bosch Security Systems 2011-02