Bosch Appliances 3.5 Control inputs, 7: Configure network controller, step, Act on contact, Break

Praesideo 3.5 Installation and User Instructions 9 System Configuration

en 343

43.2.5 Control inputs

figure 43.7: Configure network controller, step 5

table 43.4: Control inputs configuration

Item	Value	Description
Input		Unique name for the control input. The input
		can be enabled and disabled using the
		enable checkbox.
Act on contact	Break	Sets the action of the control input. See
	Make	chapter 47.
Function	Various	Sets the action of the control input. See
		chapter 47.
Supervision	On, Off	Switches supervision of the control input on
		(On) or off (Off).
Actions	1..5	Selects the number of actions for this control
		input if it is a Call activation key, Start or Stop

Multiple calls can be started or stopped from a single control input or keypad key.

•This applies to Call activation inputs/keys, Start inputs/keys and Stop inputs/keys.

•Up to five calls can be started/stopped by a single action, e.g. an evacuation message on one floor and alert messages on lower and higher floors.

•The sub-calls can have different priorities and zones/zone groups, but have the same activation behavior (e.g. momentary).

Bosch Security Systems 2011-02