Bosch Appliances manual Praesideo 3.5 Installation and User Instructions EN54-16

Praesideo 3.5 Installation and User Instructions EN54-16: 2008

en 45

Clause / Requirement

13 Design requirements

13.1General requirements and manufacturer's declarations

13.1.1The VACIE shall comply with the design requirements of this clause, where relevant to the technology used. Some requirements can be verified by testing. Others can only be verified by inspection of the design and its accompanying documentation because of the impracticability of testing all of the possible combinations of functions and of establishing the long-term reliability of the VACIE.

13.1.2In order to assist the process of design inspection, the manufacturer shall declare the following in writing:

athat the design has been carried out in accordance with a quality management system which incorporates a set of rules for the design of all elements of the VACIE;

bthat the components of the VACIE have been selected for the intended purpose and are expected to operate within their specification when the environmental conditions outside the cabinet of the VACIE comply with Class 3k5 of EN 60721-3-3:1995 + A2:1997.

Compliance Signature

Praesideo is compliant.

See the relevant clauses regarding testing and documentation.

The Bosch Security Systems development department responsible for development/maintenance of the Praesideo system works according its own development process, Standard Development Process or SDP, that is created using the CMMI model. The SDP implements all process areas at maturity level 2 of the CMMI model, and some process areas at maturity level 3 of the CMMI model.

Rules for the design of all elements of the Praesideo system can be found in the SDP repository. In the SDP repository all process descriptions, process implementation documents, templates, guidelines, etc. of the development processes can be found.

The SDP repository is a version control system.

The components of the Praesideo system operate within their specification within the specified environmental conditions (Class 3k5 of EN 60721-3-3:1995 + A2:1997). This is verified by means of testing and is documented in the test reports. The 19"-racks for Praesideo are part of the system and subject to certification. A rack must be selected from the list of approved racks for this purpose.

13.2 Documentation	Praesideo is compliant.
13.2.1 The manufacturer shall prepare installation and user	The Praesideo Installation and User Instructions (IUI) are
documentation which shall be submitted to the testing	provided as multilingual pdf-files on the DVD that contains
authority together with the VACIE. This shall comprise at	the software for installation and configuration. The IUI can
least the following:	also be downloaded from Extranet.
a a general description of the equipment, including a list	The IUI contains a general description of the Praesideo
of	system. It includes an EN54-16 checklist, containing a list
	of supported optional functions.
	It describes all Praesideo functions related to EN54-16 or
	otherwise.
1 the optional functions with requirements of this	See this checklist, clause 4.1.1.
European Standard,
2 the functions relating to other parts of EN 54, and

3the ancillary functions not required by this European Standard;

b technical specifications of the inputs and outputs of the		The inputs and outputs for audio and control are described
VACIE, sufficient to permit an assessment of the		in the IUI, including the technical data, system functions,
mechanical, electrical, and software compatibility with		configuration instructions, compliancy to standards. This
other components of the system (e.g. as described in		includes the information as requested in 13.2.1 b) 1)..7).
EN 54-1), including where relevant		The Open Interface is described in the ‘Open Interface
		Programming Instructions’ (OIPI). This document is always
		delivered together with the Praesideo system as a pdf-file
		on the distribution DVD. This document gives enough
		information for third party programmers to create
		applications to control or display Praesideo functions.
1	the power requirements for recommended
	operation,
2	the maximum number of voice alarm zones,
3	information concerning the connection of
	emergency microphones,
4	the maximum and minimum electrical ratings for
	each input and output,

Bosch Security Systems 2011-02