Bosch Appliances 3.5 manual Zone & amplifier, 45.1Introduction, 45.2Zone configuration

Models: 3.5

1 498
Download 498 pages 15.1 Kb
Page 373
Image 373
45 Zone & amplifier

Praesideo 3.5 Installation and User Instructions 9 System Configuration

en 373

45 Zone & amplifier

45.1Introduction

On the Zone & amplifier pages, the zones and amplifiers can be configured. It is possible to:

Configure zones (see section 43.2).

Configure zone groups (see section 45.3).

Assign spare amplifiers to main amplifiers (see section 45.4).

Configure BGM channels (see section 45.5).

Zone & amplifier

45.1Introduction Zone configuration

figure 45.1: Zone & amplifier pages Zone grouping

45.2Zone configuration Sparing

45.2.1 Introduction BGM channels

figure 45.1: Zone & amplifier pages

45.2Zone configuration

45.2.1 Introduction

On the Zone configuration page, zones can be built. A zone is a group of audio outputs that, for example, go to the same geographical area. For example, consider multi-channel interfaces PRS-MCI with basic amplifiers that are part of a Praesideo system on an airport:

Audio outputs (MCI_01_AMP1) and (MCI_01_AMP2) go to departure hall 1.

Audio outputs (MCI_02_AMP1) and (MCI_02_AMP2) go to departure hall 2.

Then, a zone can be created called Departure 1 to group the loudspeaker lines that go to departure hall 1 and a zone called Departure 2 to group the loudspeaker lines that go to departure hall 2.

Note

An audio output cannot be part of more than one zone. After an audio output has been assigned to a zone, it is not allowed to assign the audio output to another zone (group).

To control external devices during the audio phase of a call, it is possible to include Zone active output and Volume override output control outputs in a zone. A Zone active output control outputs is activated when a call starts and deactivated when a call ends in the zone of which it is part. A Volume override output control output performs the same action for calls with priority 32 or higher.

Note

A control output cannot be part of more than one zone. After a control output has been assigned to a zone, it is not allowed to assign the control output to another zone.

Bosch Security Systems 2011-02

Page 373
Image 373
Bosch Appliances 3.5 manual 45.1Introduction, 45.2Zone configuration, 1: Zone & amplifier pages