Bosch Appliances 3.5 manual Fiber interface, CobraNet interface, Add a fiber interface

Praesideo 3.5 Installation and User Instructions 9 System Configuration

en 336

42.7 Fiber interface 42.8 CobraNet interface

42.7.1 Add a fiber interface

Adding a fiber interface to the system definition is similar to adding a power amplifier (see section 42.4.1). Go to Configure > System definition > Fiber interface, click the Add button and:

Note

Only PRS-FIN(S) Fiber Interfaces have to be configured. PRS-FINNA Fiber Interfaces cannot be configured.

•Enter a name for the fiber interface in the Name field. The name may consist of up to 16 characters.

•Enter the hexadecimal serial number of the fiber interface in the Serial number field.

figure 42.14: Fiber interface definition

42.7.2 Delete a fiber interface

Deleting a fiber interface from the system definition is similar to deleting a power amplifier (see section 42.4.2). Go to Configure > System definition > Fiber interface, select the fiber interface that has to be deleted and click the Delete button.

42.8.1 Add a CobraNet interface

Adding a CobraNet interface to the system definition is similar to adding a power amplifier (see section 42.4.1). Go to Configure > System definition > CobraNet interface, click the Add button and:

•Enter a name for the CobraNet interface in the Name field. The name may consist of up to 16 characters. The name is also shown on the display of the CobraNet interface.

•Enter the hexadecimal serial number of the CobraNet interface in the Serial number field.

figure 42.15: CobraNet interface definition

42.8.2 Delete a CobraNet interface

Deleting a CobraNet interface from the system definition is similar to deleting a power amplifier (see section 42.4.2). Go to Configure > System definition > Cobranet interface, select the CobraNet interface that has to be deleted and click the Delete button.

Bosch Security Systems 2011-02