Bosch Appliances 3.5 manual 4: Add zone, step, 5: Add zone, step, 6: Volume settings

Praesideo 3.5 Installation and User Instructions 9 System Configuration

en 375

figure 45.4: Add zone, step 2

3 Click the OK button.

4Select the output that must be added to the zone from the left box. For example, MCI_02_AMP1.

5Double click the selected output or click the > button to add the output to the zone (see figure 45.5).

figure 45.5: Add zone, step 5

6Repeat steps 4 and 5 to add additional outputs to the zone.

7Open the Volume settings category to do the volume settings (see section 45.2.4).

8 Open the AVC settings category to do the AVC settings (see chapter 49).

9Submit the changes. Note that the changes are not permanent until the configuration is saved (see section 40.4.4 and section 40.4.5).

45.2.4 Volume settings

In the Volume settings category (see figure 45.6) of the zone configuration page, it is possible to:

•Set the maximum BGM volume (Maximum BGM volume). It is not possible to adjust the BGM volume, for example from a call station keypad, to a higher level than the maximum BGM volume.

•Set the initial, start-up BGM volume (Initial BGM volume).

•Schedule BGM volume attenuation (scheduled BGM volume adjustment). These functions can be used to automatically decrease the BGM volume during certain periods of time (for example, in the evening). During the periods of time that both functions are active, the attenuations add up.

•Schedule call volume attenuation (scheduled call volume adjustment). With this function the call volume can be automatically decreased during a certain period of time (for example, in the evening).

figure 45.6: Volume settings

Bosch Security Systems 2011-02