Bosch Appliances 3.5 manual 42.4.2Delete a power amplifier, 7: Add power amplifier, step

Praesideo 3.5 Installation and User Instructions 9 System Configuration

en 334

4Click the OK button to add the power amplifier to the list of power amplifiers in the system. A screen similar to the one in figure 42.7 appears in the main frame of the web interface.

2Click anywhere in the row of the power amplifier that has to be deleted from the system definition. The entire row is highlighted (see figure 42.9).

figure 42.7: Add power amplifier, step 4 figure 42.9: Delete power amplifier, step 2

5When the power amplifier is physically present, it can be enabled by ticking the Enabled checkbox.

6Submit the changes. Note that the changes are not permanent until the configuration is saved (see section 40.4.4 and section 40.4.5).

42.4.2Delete a power amplifier

Proceed as follows to delete a power amplifier from the system definition:

Note

It is not recommended to delete a unit if its inputs or outputs are being used in for example the Zone & Amplifier or Action Programming pages. However, if a unit is deleted, all of its inputs and outputs will be removed from the configuration (e.g. from macros and zones).

1Go to Configure > System definition > Power amplifier. A screen similar to the one in figure 42.8 appears in the main frame of the web interface.

figure 42.8: Delete power amplifier, step 1

3Click the Delete button. A screen similar to the one in figure 42.10 appears in the main frame of the web interface.

figure 42.10: Delete power amplifier, step 3

4Click the OK button to delete the power amplifier from the system definition. A pop-up window asks for confirmation.

5Click the OK button to confirm the pop-up message. A screen similar to the one in figure 42.11 appears in the main frame of the web interface. The deleted power amplifier is no longer listed in the table.

figure 42.11: Delete power amplifier, step 5

Bosch Security Systems 2011-02