Bosch Appliances 3.5 18: PC Telephone Interface Client user, configuration, Configure SIP Users…

Praesideo 3.5 Installation and User Instructions 11 Optional Software

en 468

Server. The names of these items consist of the configured name of the NCO and the zone name, using the format <Network Controller name>_<Zone (group) name>. This list is read-only; therefore the navigation bar does not have Add, Delete and Copy to new buttons. The bar is only used for navigation through the list. The Network Controller and Zone (group) fields are read-only text fields that show the name of the zone or zone group that is currently selected and the network controller where it is defined.

The Numerical alias field is a text field with a maximum length of 16 digits that contains a number that should uniquely identify the zone or zone group. The field only accepts numbers (other characters are ignored when typed) and may be left empty.

Even if the original zone (group) name was already numerical, still the Numerical alias should be filled in.

59.5.4.11Configure PC Telephone Interface Client Users…

In this window the PC Telephone Interface Client users can be configured and managed.

the access rights can be made different for different users (callers). The user can only make calls via telephone based on one of the predefined calls that are configured for this user. Only predefined calls that have been configured for use by the PC Telephone Interface Client with a Numerical alias (see section 59.5.4.4) can be selected.

59.5.4.12 Configure SIP Users…

In this window the SIP users of the PC Telephone Interface Client, using a VoIP connection (Voice over IP) can be configured and managed. SIP (Session Initiation Protocol) is a communication protocol for VoIP.

figure 59.18: PC Telephone Interface Client user

configuration

The Personal number (similar to a user name) should uniquely identify the user, who wants to access the Praesideo system with a telephone. Only numbers, up to 16 digits, are accepted. Each user with a personal number must have a PIN code (similar to a password). The PIN code may not be empty. This code can be added or changed via the Change button. The maximum length of the PIN code is 16 digits, all numerical. Pressing the Select button brings up a selection window to create a list of predefined calls for this user. This way

figure 59.19: SIP user configuration

Enter the SIP user name for this SIP account; up to 20 alphanumerical characters are accepted. Then a password should be added. A password can be added or changed via the Change button. The maximum length of the password is 16 alphanumerical characters. An empty password is also allowed (i.e. no password). This SIP user name and password should match those in the PSTN configuration. See section 61.8.3. Checking the checkbox Direct access allows the user of this SIP account to access the Praesideo system without having to enter a personal number and PIN code. Identification is then based on the SIP user name (and password, if entered).

In practice many different users may use the same SIP account for access to the Praesideo system. Differentiation between user rights is then best accomplished by using the personal numbers and PIN

Bosch Security Systems 2011-02