Bosch Appliances 3.5 manual 42.9TCP/IP device, Add a TCP/IP device, Delete a TCP/IP device

Praesideo 3.5 Installation and User Instructions 9 System Configuration

en 337

42.9TCP/IP device

42.9.1 Add a TCP/IP device

TCP/IP devices can access the system through the open interface. When a TCP/IP device is added to the system definition, it becomes a part of the system and can be supervised.

Note

Supervised TCP/IP devices must be active when the system is active. Otherwise, the system generates a fault event.

Adding a TCP/IP device to the system definition is similar to adding a power amplifier (see section 42.4). Go to Configure > System Definition > TCP/IP device, click the Add button and:

•Enter a name for the TCP/IP device in the Name field. The name may consist of up to 16 characters.

•Enter the IP address of the TCP/IP device in the IP address fields.

•Use the Connection supervision list to specify if the connection to the TCP/IP device must be supervised (On) or not (Off).

figure 42.16: TCP/IP device definition

TCP/IP devices that are not added to the system definition can also connect to the Praesideo system through the open interface when the Access permission for non-configured TCP/IP devices is set to Yes (see section 44.4). However, the connection of such a TCP/IP device to the system is not supervised.

Note

A maximum of 5 TCP/IP devices with an open interface access (refer to chapter 54, Open Interface) can be used with a network controller, irrespective of being a system element, supervised or neither. TCP/IP devices can be a PC call server or a logging server. The configuration web browser uses a different port (port 80) for the connection and is not part of this limitation.

42.9.2 Delete a TCP/IP device

Deleting a TCP/IP device from the system definition is similar to deleting a power amplifier (see section 42.4.2). Go to Configure > System definition > TCP/IP device, select the TCP/IP device that has to be deleted and click the Delete button.

Bosch Security Systems 2011-02