Bosch Appliances 3.5 manual en, Flash card data error, Flash card missing, Group A fault

Praesideo 3.5 Installation and User Instructions 10 Events

en 424

Event message:

Flash card data error

Originator:

Unit in which the fault occurred. Extra information:

This fault event aggregates to a System fault. Description:

Logs a fault in the checksum of the flashcard. This fault event can only occur when the availability of a flash card is enabled with the configuration software and the flashcard is not missing.

Resolve:

When the fault disappears.

Recommended action:

•Replace the message set on the flashcard using the File Transfer application OR

•Replace the flashcard.

Event message:

Flash card missing

Originator:

Unit in which the fault occurred. Extra information:

This fault event aggregates to a System fault. Description:

Logs the absence of the flash card. This error can only occur when the availability of a flash card is enabled with the configuration software.

Resolve:

When the fault disappears and the network controller restarts.

Recommended action:

Check if a flashcard has been installed in the unit. If so, re-connect the flash card or replace it and restart the network controller.

Event message:

Group A fault

Originator:

Output channel of multi channel interface, connected to a basic channel in which the fault occurred.

Extra information:

----

Description:

Logs the failure in group A for audio outputs with A/B switching or class-A wiring.

Resolve:

When the unit disconnects or when the fault is resolved manually.

Recommended action:

Check the loudspeaker connections on the Group A output of the basic amplifier channel.

Event message:

Group A or B line fault

Originator:

Output channel of multi channel interface, connected to a basic amplifier channel in which the fault occurred.

Extra information:

----

Description:

Logs a loudspeaker line fault in group A/B wiring mode while busy determining whether a Group A fault or Group B fault must be generated.

Resolve:

When the unit disconnects, or when the fault is no longer present, or when the actual cause of the fault is known (and a Group A fault or Group B fault has been generated).

Recommended action:

Wait for Group A fault or Group B fault and check the corresponding loudspeaker lines.

Bosch Security Systems 2011-02