Bosch Appliances 3.5 Overview, Procedure, 11: Sparing, step, 12: Sparing, step, 13: Sparing, step

Praesideo 3.5 Installation and User Instructions 9 System Configuration

en 378

On the Spare power amplifier page, main amplifiers can be assigned to spare amplifiers. For example, consider a small airport with four LBB4424/10 Power Amplifiers (4 x 125 W). Two of these power amplifiers are main amplifiers (PAM_01 and PAM_03), whereas the other power amplifier are spare amplifiers (PAM_02 and PAM_04). Then, PAM_04 can be configured as spare amplifier for PAM_03.

45.4.2 Overview

The Spare power amplifier page (see figure 45.10) contains the following:

•Name - Name of the spare amplifier to which a main amplifier must be assigned.

•Main amplifiers - List of main amplifiers that can be assigned to a spare amplifier.

•Assigned amplifiers - List of main amplifiers assigned to the selected spare amplifier.

•Add/Remove buttons - Using the > and < buttons, selected main amplifiers can be added to or removed from Assigned amplifiers.

•Submit - Using this button changes are submitted to the network controller.

45.4.3 Procedure

Proceed as follows to assign a main amplifier to a spare amplifier:

1Go to Configure > Zone & amplifier > Sparing. A screen similar to the one in figure 45.11 appears in the main frame of the web interface.

figure 45.11: Sparing, step 1

2Select the spare amplifier to which the main amplifier must be assigned from the Power Amplifier dropdown list. For example, PAM_04 (see

figure 45.12).

figure 45.12: Sparing, step 2

figure 45.10: Sparing, overview	3 Select the main amplifier that must be assigned to
	the spare amplifier from the left box (see
	figure 45.13).

figure 45.13: Sparing, step 3

Bosch Security Systems 2011-02