Bosch Appliances 3.5 Security, Use the controls in the Viewer/Network controller, 56.7.5.1, that

Praesideo 3.5 Installation and User Instructions 11 Optional Software

en 453

56.7.5 Security

56.7.5.3Viewer/Network controller authentication

Use the controls in the Viewer/Network controller

56.7.5.1	Overview	authentication block to set the password and user name
On the Security tab (see figure 56.13), the security		that:
settings can be defined.		• Gives a Logging Viewer access to the Logging Server (see
		section 57.6.2.5).
		• Gives the Logging Server access to all connected
		network controllers.
			Note
			Make sure that all systems have an account (see
			section 40.2) that contains the user name and
			password in the Viewer/Network controller
			block. Otherwise, the Logging Server cannot
			connect to the systems.
figure 56.13: Security tab
56.7.5.2	Server authentication
Use the controls in the Server authentication block to:

•Enable and disable server authentication with the Use authentication box. When server authentication is enabled, a user name and password must be entered to get access to the main window (see section 56.5.1).

•Set the password and user name to get access to the Logging Server with the Change User Name/Password button. A password and user name can only be set when server authentication is enabled. The password must have at least five (5) characters. The user name must have at least four (4) characters.

Bosch Security Systems 2011-02