Bosch Appliances 3.5 6: Control output types, Switch output, Zone active output, Emergency alarm

Praesideo 3.5 Installation and User Instructions 9 System Configuration

en 345

table 43.6: Control output types

Function	Description
Switch output	The control output is activated by a Switch trigger control input or keypad key. See
	section 47.3.27.
Zone active output	The control output is activated when there is an active call in the associated zone (see
	section 45.2.
Volume override output	The control output is activated when there is an active call with priority 32 or higher in
	the associated zone. See section 45.2.
Fault alarm buzzer	The control output activates a fault alarm buzzer (e.g a connected buzzer) each time a
	fault is detected in the system. It can only be deactivated by acknowledging all faults.
Fault alarm indicator	The control output activates a visual fault indicator (e.g. a lamp) each time a fault is
	detected in the system. It can only be deactivated by resetting all faults.
System fault indicator	The control output activates a visual fault indicator (e.g. a lamp), each time a System
	fault is detected in the system. System faults are a special category of faults, a subset
	of all possible faults. System faults are: Configuration file error, Flash card data error,
	Flash card missing, No valid configuration file found, Processor reset.
Emergency alarm buzzer	The control output activates an emergency alarm buzzer (e.g a connected buzzer) each
	time a call with priority 223 or higher is started (i.e. an emergency call). It can only be
	deactivated by acknowledging the emergency state.
Emergency alarm	The control output activates a visual emergency indicator (e.g. a lamp) each time a call
indicator	with priority 223 or higher is started (i.e. an emergency call). It can only be deactivated
	by resetting the emergency state.

Bosch Security Systems 2011-02