Bosch Appliances 3.5 manual 8: Installation, 10: Tyco AMP 169111-1pliers

2011-02 Installation and User Instructions 5 Call Stations

en 231

19.3 Installation	To connect the wires to the shrink-contacts, use one of
The call station keypad kit contains four holes for	the following pliers (see also the following figures):
installation purposes (see figure 19.8).	•	Tyco AMP 169111-1 pliers (see figure 19.10)
	•	Tyco AMP Modu 4 169481-1 pliers (see figure 19.11)

90 100

80

90

figure 19.8: Installation

The kit is delivered together with Tyco AMP pin headers and Tyco AMP 1-141708-1 shrink-contacts (see figure 19.9) to facilitate the connection of wires to the PCB. These pin headers are suitable for wires with a cross-section from 0.2 to 0.56 mm2. It is possible to solder the wires to the pin headers.

Note

If the call station keypad kit is installed in a vibrating surrounding (e.g. a ship), glue the pin header to the PCB.

figure 19.9: Tyco AMP 1-141708-1 shrink-contact

	169111-1
				6	4 2
0.75-	1 1.5 2.5	4	5	mm	5 3 1
				2
0.5

figure 19.10: Tyco AMP 169111-1 pliers

MODU 4	0
		0
	0 .
	.
	093
	0.2 0.56
	0	0
	.
	1	1
	4	.
16 9 4 81 - 1		2

figure 19.11: Tyco AMP Modu 4 169481-1 pliers

Bosch Security Systems 2011-02